User Manual
Table Of Contents
11
ENGLISH
hyper BASS series User manual
9) Shape
When pressed, this switch changes the impulse response of the subwoofer, making it
punchy and thumping. It is suggested especially in DJ applications or with dance music.
10) GND
By leaving this switch unpressed ( ) you can reduce or eliminate the interference
which is sometimes caused by connecting signal lines between two or more pieces
of equipment. It interrupts the ground line at some point. It is particularly eective at
eliminating ground loops, but it may also increase or decrease noise from other sourc-
es.
11) Sub Level
This knob adjusts subwoofer level.
4. INSTALLING WHEELS ON HYPER BASS 15A / 18A
To facilitate the transport of 15” and 18” subwoofers, we predisposed 16 x M8 holes on
the rear side for four wheels.
All holes comes with M8 drive-in nut. We suggest to use M8 x 30mm (at least) screws,
hexagonal head with washer.
For further information on how to buy these wheels, please contact your nearest
Soundsation dealer or refer to following picture to get them from your regular dealer.