User Manual

5
ENGLISH
hyper BASS series User manual
The apparatus should be located away from heat sources such as radiators, stoves or
other appliances that produce heat. It may carry high heat, do not aim at objective
exceeding 2 minutes.
3) Ventilation
The unit must be installed in a location with adequate ventilation, at least 5m away
from adjacent surfaces. Be sure that no ventilation slots are blocked.
4) Object and Liquid Entry
Objects do not fall into and liquids are not spilled into the inside of the apparatus for
safety.
5) Installation
Always secure speaker using a safety chain and carrying handles. Never carry the unit
by its cord.
6) Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus. Do not defeat
the safety purpose of the polarized or grounding-type plug. A polarized plug has two
poles; a grounding-type plug has two poles and a third grounding terminal. The third
prong is provided for your safety. If the provided plug does not t into your outlet,
refer to an electrician for replacement.
7) Power Supply
Always make sure that you are connecting to the proper voltage and the line voltage
not higher than stated on the decal or rear panel of the unit. Unplug this apparatus
during lightning storms or when unused for long periods of time.
8) Fuse
To prevent the risk of re and damaging the unit, please use only of the recommend-
ed fuse type as described in the manual. Before replacing the fuse, make sure the unit
turned o and disconnected from the AC outlet.
9) Electrical Connection
Always disconnect from the power source before servicing or replacing fuse/lamp and
be sure to replace with same fuse/lamp size and type. Cut o power before moving,
repairing and cleaning the unit. Improper electrical wiring may invalidate the product
warranty.
To avoid electric shock, all units must be connected to circuits with a suitable ground.
Do not power on and power o the apparatus in a short time.
10) Cleaning
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
11) Servicing
In case of failure or mis-function occurred, stop using the unit immediately. Never try to