User Manual

6
ENGLISH
hyper BASS series User manual
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center. Buy
the same spare parts/components from manufacturer directly.
Any damage that cased by violating this manual is out of insurance, our company will
not take the responsibility.
12) Warning
In case of lighting products, avoid direct eye exposure to the light source while it is
on. In case of audio products, please remember the high sound pressure do not only
temporarily damage your sense of hearing, but can also cause permanent damage. Be
careful to select a suitable volume.
1.3. BeforeYouStart
1) UNPACKING
Thank you for purchasing HYPER BASS Series active subwoofer. Each unit has been well
tested and shipped in perfect operating conditions. Carefully unpack the carton and
check the contents to ensure that all parts are present and in good conditions:
f 1 Loudspeaker
f 1 Power cable
f 1 User manual
If anything damaged during transport, notify the shipper immediately and keep pack-
ing material for inspection. Again, please save the carton and all the packing mate-
rials. If the unit must be returned to the manufacturer, it is important that the unit is
returned in the original manufacturer’s packing. Please do not take any action without
rst contacting us.
2) Getting started
HYPER BASS Series subwoofer are part of a wider range of SOUNDSATION Pro Au-
dio product line. These active subwoofers are compact, light weight and very easy to
use. They are ideal for any live music or xed installation purpose. Make sure there is
enough space around the unit for proper ventilation and prevent overheating; do not
place the unit on top of hot devices such as radiators or power ampliers. The speaker
is connected to mains through the supplied cable. The product meets the required
safety standards. Blown fuses must be replaced with fuses of the same type and speci-
cation.
Make sure that all units must be properly grounded. For your safety, you
should never remove any ground connector from electrical devices or power
cables, or make them inoperative.
Our products are subject to a process of continual further development. Therefore