D200 DUAL MONAURAL AMFUFIER DlOO STEREO AMPLIFIER CLASS-A-50 CLASS A AMPLIFIER CLASS-A-40 CLASS A AMPLIFIER D60 STEREO AMPLIFIER OWNER’S MANUAL
LED P 0 WER INDICATOR lwner’s Manual for SOUNDSTREAM ,200, D 7 00, D60, CLASS-A-50 & CLASS-A-40 mpiifiers Your amplifier (except D60) is equipped with an LED (+i : ), which glows when power is applied to the amplifier. Since power should be disconnected dunng installation, these LED should be dark until you are finrsned. The LED will go out if either the power-lrne fuse or the internal fuse is blown. lank you for purchasing a Soundstream amplifier.
a good idea to bench test your system before mounting the components. If you have a 1 Z-volt power source, you can connect and test all the components outside the car. Or you can connect them inside the car before screwing them down. Either way, connect the components exactly as you intend to in the final installation; make all power connections last; test the system: then disconnect all power until the final installation is complete.
DESIGN FEATURES Only premium parts are used in ycur Soundstream amplifier, such as metal-film resistors, gold-plated input connectors, and immersrble sealed potentiometers. Each output device is individually rated at 125 watts. The case is equipped with generous heat sinks, and thermal protection is provided. Input sensitivity is adjustable to match any tuner/deck -the amplifier can even be used as a power booster.
