Owner's Manual

Vehicle conditions, amplifier, music preferences, & other variables make it
difficult to give you exact dimensions for an enclosure deisgn. For enclosure
designs tailored to your specific needs, please contact us at tech-support@
soundstream.com, or 1-800-724-1377.
All enclosures should be made of .75” (3/4”) material only. When possible, make
the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth of the enclosure to
compensate. All volumes INCLUDE vent/port and subwoofer displacements.
DO NOT change the volume unless you plan on adding a substantial amount
of bracing. For added performance, applying a coat of fiberglass resin to
the interior walls will greatly improve sealing the enclosure. Adding a thin
layer of poly-fill will improve response by smoothing out reflections within
the enclosure.
Below are recommended enclsoure designs and their expected performance:
RSW.12 Recommended Sealed Enclosures RSW.12 Recommended Ported Enclosures
Volume (ft
3
) QTC Tuning (Hz) Volume (ft
3
) Round Port Tuning (Hz)
Min. 0.75 .884 52.5 1.75 4” x 15.25”L 33.3
Opt. 1.00 .785 50.3 2.00 4” x 14.5”L 31.1
Max. 1.25 .725 49.5 2.25 4” x 14”L 29.3
RSW.12
RSW.15 Recommended Sealed Enclosures RSW.15 Recommended Ported Enclosures
Volume (ft
3
) QTC Tuning (Hz) Volume (ft
3
) Round Port Tuning (Hz)
Min. 1.50 .914 44.3 3.00 (2) 3” x 9.75”L 31.3
Opt. 2.00 .812 42.3 4.00 (2) 4” x 15.75”L 28.5
Max. 2.50 .749 41.6 5.00 (2) 4” x 13”L 26.8
RSW.15
RESERVE
CAR AUDIO
SUBWOOFER
RSW.122 / RSW.152