User Manual

TV SECTION (For VIR-7830BT only)

Connect a TV antenna to the TV antenna jack of the unit. Select TV mode, and then touch the

center of the display; following interface will be display.

In TV mode, press the Play/Pause buttons on front panel or remote once to enter TV menu

setting; or press TV MENU icon on the main menu to enter TV menu.

1. Press the / on remote or tap the screen to select one of the setup pages: Auto program

=> Manual program.

2. To enter the selected page press ENTER button on the RC. Press UP/DOWN cursor buttons

on the RC

Select this menu item is to set the storage number or touch the needed item on the screen to

select an item, and then press ENTER button on the RC or press the item on the screen to

adjust the setting. Tap BACK button to return to the setup page.

3. Press the △/ ▽ Icon to adjust TFT angle.

4. Press the icon to be back to main menu.

5. Press the / button to switch channel.

Note: This function is available when TV tuner is connected.

TV MENU

Auto program (Auto seek mode)

 System

Select the menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on

remote or touch corresponding option on the touch screen to select.

 Audio

Select this menu item is to set the TV sound system:

1) When system setting PAL, TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER

on remote or touch corresponding option on the touch screen to select.

2) When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on

remote or touch corresponding option on the touch screen to select.

3) When system setting NTSC, M/N sound system can be selected only.

 Search

Select this menu item is to start searching and storing stations automatically.