Plug-In User Guide / Owners Manual

14
soundtoys.com
THE PHASEMISTRESS CONTROL PANEL - LFO MODE TWEAK MENU
The Freq Mod determines both the direction of the modulation applied
to the Frequency parameter as well as defining the maximum depth that
can be applied when the front panel Mod knob is turned all the way up.
The knob is center justified with the 12 o’clock position being “0” or no
modulation. Turning the knob clockwise or inputting a positive number
into the numerical field will add positive modulation. Turning the knob
counter clockwise will also add modulation but in a negative direction.
The available values are; “-10.00 Oct” to “10.00 Oct”
As an example, a setting of “8.00 Oct” means that the modulation
applied to the Frequency will modulate the frequency of the filters in a
positive manner and that the maximum depth available when the Mod
FREQ MOD
knob on the front panel is turned all the way up is “8” octaves above
the front panel Frequency setting. This was used as the “default” setting
when we created the various Mode presets but may be set quite differ-
ently as you create your own presets.
Conversely, if you set the Freq Mod to a negative setting of say “-5.00
Oct”, the modulation applied to the Frequency will modulate the fre-
quency in a negative manner with the maximum modulation available
being minus 5 octaves with the front panel Mod knob turned all the way
up.
Again, if you set the Freq Mod to “0” (12 o’clock), NO modulation will
be applied to the Frequency regardless of the setting of the front panel
PhaseMistress — Version 5
Figure 7: LFO Mode’s Tweak Menu