User Guide / Owners Manual

5
soundtoys.com
THE TREMOLATOR CONTROL PANEL
Tremolator — Version 5
Figure 2: The Tremolator Control Panel
The Input and Output level controls are used to either boost or
attenuate the input or output of Tremolator. The default setting of these
controls approximate “unity gain” (what goes in also comes out the
same level) and should provide the best overall “normal” sound quality
when set to these levels.
The LED-style indicators located beneath the Input and Output knobs
provide a visual display of the input and output signal levels. The
yellow LED indicates that the signal is 6dB below clipping. The red LED
indicates maximum signal level, and possible audible clipping (which you
may or may not wish to have as part of your sound).
INPUT AND OUTPUT LEVEL
These controls are particularly useful in allowing you to control the
amount of saturation and distortion present in Tremolator.
Figure 3: Output LED indicating maximum signal level