User Guide / Owners Manual

9
soundtoys.com
THE TREMOLATOR CONTROL PANEL - TWEAK MENU
Tremolator — Version 5
THRESHOLD
The Threshold knob, located at the start of the Tweak Menu is central
to all other controls as it affects the responsiveness of the other
knobs. The Threshold control allows you to define a specific level (as in
loudness) that the input must reach before any dynamic processing of
the Rate or Depth (as set with those controls) will be implemented. The
scale of the Threshold control is in standard ‘dB’.
There are two things to keep in mind regarding the Threshold control:
1) As long as the level of the input signal is above the Threshold level,
the modulation of Rate and Depth will be active. As soon as the level of
the input signal falls below the set Threshold, all modulation is turned
off and completely de-activated.
2) How far the input signal goes above the Threshold determines how
“deep” the modulation will go (with the maximum available mod depth
being defined by the settings of the other controls).
Figure 4: Tremolator’s Powerful Tweak Menu