Owner's Manual

ManualsBrandsSoundTube ManualsCommercial audio & videoRS62-EZ

SOUNDTUBE

Lead.

follow.

Sen

.&S

Install

Instructions

For:

- RS42-EZ-WH, RS4

EZ-BK,

RS62-EZ-WH

RS62-EZ-BK

Cover

Plate-----

Weather

plug

Screws

(4)

Cover

Plate

Box

contents

1 Speaker

Cover

Plate

w/ 4 screws

Rubber weather

plug

Hanging kit

3/8"

NPT Wire

Gland

3/4"

NPT Adapter

Hanging

Hardware

Hanging

Bracket

Warning

SoundTubc speakers

he Installed by a

professrondl

audro

rnsta

cr/

con

tor

For safety and for

mum

aud1o

mstaller

mt1

foll

all

rcc

ons

rssucd

SoundTu

ertarn

cnt

Tap

Switch

1.43

.647.9555I800

.647.TUBE

www

oundtub

.com

SoundT

ertainment,

All

righ

reserved.

NS_RS-EZ

22-2016

EN54

Document

Reference

mber

EZ00

Warning

Do not spec or

rns

t<t

speaker ncar

por1

beam.

v c

ntrl

uct

er struc

tha

t may

rntcrlcrc

1t11

speak

fun

on or

rsroP

Summary of content (4 pages)

PAGE 1
SOUNDTUBE Lead. Or follow. Rs EZ Sen.&S I Install Instructions For: - RS42-EZ-WH, RS42-EZ-BK, RS62-EZ-WH & RS62-EZ-BK Weather plug Cover Plate----Screws (4) Box contents 1 Speaker Cover Plate w/ 4 screws Rubber weather plug Hanging kit 1 3/8" NPT Wire Gland 1 3/4" to 3/ 8" NPT Adapter Cover Plate ~ Hanging Hardware Hanging Bracket Tap Switch 1.435.647.9555I800.647.TUBE I www.soundtube.com ©2016 SoundTube Entertainment, Inc. All rights reserved.
PAGE 2
1.435.647 .9555I800.647.TUBE I www.soundtube.com RS-EZ series I Install Instructions For: RS42-EZ-WH, RS42-EZ-BK, RS62-EZ-WH & RS62-EZ-BK 1. Unpack speaker and SpeedCiamp TM mounting hardware. 3. Attach the hanging cable 4. Thread cable end(s) 2. Thread hanging or safety cable through SpeedCiamp TM by securing it and safety through SpeedCiamp TM mechanisms as shown. cable to structure as mechanisms as shown. 5. Adjust speaker hanging height with SpeedCiamp rM mechanism.
PAGE 3
1.435.647.9555I800.647 .TUBE I www.soundtube.com RS-EZ series I Install Instructions For: RS42-EZ-WH , RS42-EZ-BK, RS62-EZ-WH & RS62-EZ-BK Conduit Installation: Note: Conduit is not an approved mounting method for UL1480 installations ' 1. Unpack speaker from box. 2. Securely mount conduit to structure. Conduit must have 3/4" NPT thread to accomodate RS-EZ speaker. 3. Thread cover plate on to conduit until secure. 4. Run signal wire and at least one safety cable through conduit. 5.
PAGE 4
SOUNOTUSE Lead. or follow. EN54-24 I Install Instructions For EN54-24 Compliance In order for this speaker to be EN54-24 compliant, a 3/8" NPT wire gland and a 3/4" to 3/8" NPT adapter have been included with the product. These items must be installed according to this document to be EN54-24 compliant. 3/8" NPT Wire Gland 3/4" to 3/8" NPT Adapter Installation 1. Thread the 3/4" to 3/8" NPT adapter into the the top plate of the speaker in the hole provided.