Owner's Manual

SOUNOTUSE
Lead
.
or
follow
.
EN54-24
I
Install Instructions
For
EN54-24
Compliance
In
order for this speaker to be EN54-24 compliant, a 3/8" NPT wire
gland
and a 3/4"
to
3/8" NPT adapter have been
included with
the product. These items must be installed according
to
this document
to
be EN54-24 compliant.
3/8"
NPT
Wire
Gland
3/4"
to
3/8"
NPT
Adapter
Installation
1.
Thread the 3/4"
to
3/8" NPT
adapter into the the top
plate of the
speaker
in
the hole
provided. Make
sure
to
tighten securely
to ensure a
water tight fit.
4. Thr
ea
d
s
ignal
wir
es
through the
provided conduit knockouts.
Note:
A
water
tight
conduit
connection
must
be
used
in
the
knockout
locations
in
order
to
be
EN54-24
compliant
2.
Thread the 3/8" NPT wire
gland
into the 3/4"
to
3/8" NPT adapter.
Make sure
to
tighten
securely
to
ensure a water tight fit.
5.
Done
3. Thread the speaker security
cable
through the 3/8" NPT wire
gland and attach
to
the back of the
speaker as noted
in
the installation
instructions.
Tighten the
top
of 3/8" NPT wire
gland
such that the rubber grom-
met is tight around the
cable.
This
may
require
a
wrench
.