User Manual

Table Of Contents
SA260 Nemesis Delay User’s Guide 46
Factory Reset. You should only create a custom MIDI CC mapping if you know what you are
doing. If you are unsure, then we recommend sticking to the default mapping.
To create a custom MIDI CC mapping, follow these steps:
If necessary, press the CONTROL INPUT BUTTON to make the CONTROL LED illuminate.
Press and hold the CONTROL INPUT BUTTON until the CONTROL LED begins to blink.
Send the desired MIDI CC (with any value) to the Nemesis via the MIDI INPUT JACK or USB. The
CONTROL LED will begin to blink quickly when the MIDI CC is received.
Important! The next step (if you are performing it for the first time) will clear the default
MIDI CC mapping. If you wish to back out, now is the time to do it. You can press the CONTROL
INPUT BUTTON to exit the mapping and leave the default MIDI CC map intact.
If you wish to map this CC to a knob, turn the desired knob. If the mapping was successful,
the CONTROL LED will be lit solid, indicating that the mapping is complete.
If you wish to map this CC to a Neuro Parameter, move the corresponding control in the
Neuro App to send that parameter data to the Nemesis. If the mapping was successful, the
CONTROL LED will be lit solid, indicating that the mapping is complete.
Rubber Feet
The Nemesis comes standard with a flat aluminum bottom, making it easy to apply Velcro and mount
to a pedalboard. Additionally, adhesive rubber feet are included in the Nemesis box. Applying the
rubber feet to the Nemesis can help prevent it from sliding on flat surfaces such as a hardwood floor.
Waste Disposal Notes
If possible, dispose of the device at an electronics recycling center. Do not dispose of the device with
the household waste.
For full compliance with EN 61000-4-6 standard, input cable must be less than 3 meters in length.
Warranty
Limited Transferrable Warranty
Source Audio, LLC (hereinafter “Source Audio”) warrants that your new Source Audio One Series
Nemesis Delay, when purchased at an authorized Source Audio dealer in the United States of
America (“USA”), shall be free from defects in materials and workmanship under normal use for a
period of two (2) years from the date of purchase by the original purchaser. Please contact your
dealer for information on warranty and service outside of the USA.
Under this Limited Warranty, Source Audio’s sole obligation and the purchaser’s sole remedy shall be
repair, replacement, or upgrade, at Source Audio’s sole discretion, of any product that, if properly
used and maintained, proves to be defective upon inspection by Source Audio. Source Audio reserves
the right to update any unit returned for repair and to change or improve the design of the product
at any time without notice. Source Audio reserves the right to use reconditioned parts and