User Manual

SA260 Nemesis Delay User’s Guide 6
Connections
Input Side Connections
Input 1
INPUT 1 is the primary input for guitar, bass, or other instruments. It can also accept line-level inputs
and will work in your amp’s effect loop. Connect it to your instrument or other audio source using a
mono (TS) ¼” cable. Details about the allowed signal levels are available in the Specifications section.
Input 2
INPUT 2 is the secondary audio input for stereo sources, external feedback loop input, or as the data
connection to your mobile device when using the Neuro App.
Input 2 as an Audio Input
The tip contact on INPUT 2 acts as a secondary input for guitar, bass, or other instruments. Connect
your instrument (or the previous effect in the signal chain) using a mono (TS) ¼” cable. The Nemesis
will automatically configure itself for stereo audio input. Other routing options are available using the
Neuro App. For more information about stereo routing, refer to the Stereo Operation section.
Input 2 as an External Loop Return
If the Nemesis is configured in a routing mode that includes an external loop, OUTPUT 2 is the loop
send and INPUT 2 is the loop return. Connect INPUT 2 to the output of the external effects loop using a
mono (TS) ¼” cable.
Input 2 as a Neuro App Data Input
The ring contact on INPUT 2 acts as a data connection for the Neuro App. The Neuro App sends data
to the pedal using your mobile device’s headphone jack. Connect it to your mobile device using the
included stereo (TRS) 1/8” to ¼” cable. It can also accept daisy-chained Neuro data from another
Neuro-compatible pedal in the chain, provided that a TRS cable is used. The audio signal (if
applicable) will be on the tip contact of the plug, and the Neuro App data will be on the ring contact.
This allows audio and Neuro data to flow on the same cable.