Owner's manual

External Control | 19
MIDI CONTROL
The Soundblox 2 Multiwave can be controlled via General MIDI messages.
In order to use the MIDI functionality of the unit, it requires a Source
Audio Soundblox 2 MIDI Adapter. Please check www.sourceaudio.net for
availability. The adapter connects to the Multi-Function input and provides
standard MIDI IN and OUT 5-pin DIN connectors.
Using Soundblox 2 pedals with MIDI greatly extends the functionality of the
units. Having MIDI I/O allows for remote automation, external controllers,
firmware updates and more. If you have more than one Soundblox 2 pedal,
only one MIDI Adapter is necessary. The Multi-Function output will act as
a MIDI thru to pass the MIDI messages on the other pedals via a Source
Audio SA160 Daisy Chain cable.
For information on using your Soundblox 2 with MIDI and for MIDI
mappings, please visit our website at www.sourceaudio.net.