User Manual

CONTROLS: OTHER BUTTONS
PRESET BANK
There are six available user presets in two banks. Switch between banks
by pressing the PRESET BANK button. When preset bank A is selected,
pressing the corresponding footswitches will select presets 1, 2, or 3.
When preset bank B is selected, the footswitches select presets 4, 5, and
6. The indicator lights above each footswitch alternate from green for
bank A to red for bank B.
MOD SOURCE
Pressing this button selects between the three choices of modulation
source: Envelope, LFO, and Hot Hand. When Hot Hand is selected as the
modulation source, press and hold the MOD SOURCE button to start the
Hot Hand Calibration procedure. (See the Use with Hot Hand section for
calibration instructions).
TAP TEMPO ENABLE
When LFO is selected as the modulation source, press this button to
enable Tap Tempo Mode. The rightmost footswitch will be converted to
a tap tempo control. Press the TAP TEMPO MODE button again to disable
tap tempo. Tap tempo only applies in LFO mode.
MOD
SOURCE
TAP TEMPO
ENABLE
(HOLD)
CALIBRATE
BACKPAGE
MODE
ENVELOPE
LFO
HOT HAND
Controls: Other Buttons | 11
PRESET BANK
4-61-3
Bank BBank A