Datasheet

ManualsBrandsSouriau ManualsConnectorsCrimp contact Female 12 AWG

142

UTS Series

Contacts

Description

The UTS series is delivered with (solder and PCB versions) or without contact (crimp version). When contacts are not loaded, this series offers

the unique possibility to use the same contact in any layout as long as it receives the same active part size. Thus it is possible to buy only

one contact reference and equip all connectors even if housings are different.

The main benefit is the standardisation which means reduction of inventory cost.

Bearing in mind that any additional tool or complicated assembly process should be avoided, our contacts are based on a snap-in principle

which avoid the use of an insertion tool.

Crimp contacts are available in different versions:

In addition, UTS series can obviously be equipped with solder contacts, PCB contacts, screw termination.

• stamped & formed • coaxial • fiber optic

• machined

Summary of content (6 pages)

PAGE 1
UTS Series Contacts Contacts Description The UTS series is delivered with (solder and PCB versions) or without contact (crimp version). When contacts are not loaded, this series offers the unique possibility to use the same contact in any layout as long as it receives the same active part size. Thus it is possible to buy only one contact reference and equip all connectors even if housings are different. The main benefit is the standardisation which means reduction of inventory cost.
PAGE 2
UTS Series Contacts Contact plating selector guide As soon as you know what contact size you need, you next have to decide on which type to use. Souriau proposes mainly two different types of electrical contacts: - Machined - Stamped & formed Machined contacts are generally chosen for low quantities purpose as well as a better solution for power applications. Stamped & formed contacts offer the ability to be crimped automatically which makes them more suitable for high volume production applications.
PAGE 3
UTS Series Contacts Contact selector guide Contact preloaded Electrical characteristics: contact resistance Available platings (contact preloaded) #20 Ø1mm Machined < 4m #16 Ø1.6mm Machined < 3m Min 0.4µ gold over 2µ Ni Contact supply separately Electrical characteristics: contact resistance Available platings (contact supply separately) Machined < 6m A 2µ Ni + 2µ Ag Stamped & formed < 15m J Gold flash over 2µ Ni Machined < 3m K Min 0.
PAGE 4
UTS Series Contacts Crimp contacts Standard version Type Machined #20 Ø1 mm #16 Ø1.6 mm 26-24 Machined 22-20 #8 Ø3.6 mm 0.32-0.52 RM24W3K (1) Max wire Ø RC24W3K SC24W3- SC24WL3-(2) RM20W3K RC20W3K Machined 20-18 0.50-0.93 Machined 30-28 0.05-0.08 Machined 26-24 0.13-0.2 (1) SC20W3- SM20WL3- Stamped & Formed 26-24 0.13-0.25 Machined 22-20 0.32-0.52 Stamped & Formed 22-20 0.35-0.5 Machined 20-16 0.52-1.5 Stamped & Formed 18-16 0.8-1.5 Stamped & Formed 18-16 0.8-1.
PAGE 5
UTS Series Contacts Crimp contacts First Mate Last Break contacts Contact size #16 Ø1.6 mm Longer male contact (+1mm) Machined #16 Ø1.6 mm Shorter female contact (-0.7mm) Wire size Type Machined AWG 30-28 mm² 0.05-0.08 26-24 0.13-0.2 22-20 0.32-0.52 20-16 0.52-1.5 16-14 1.5-2.5 16-14 1.5-2.5 30-28 0.05-0.08 26-24 0.13-0.2 22-20 0.32-0.52 20-16 0.52-1.5 16-14 1.5-2.5 16-14 1.5-2.5 Color band Part number Male Max wire Ø Max insulator Ø 0.55 1.1 0.
PAGE 6
UTS Series Contacts #16 coaxial contacts Coaxial contact range We provide 2 types of coaxial contacts suitable for 50 or 75, coaxial cable or twisted pair cable. Monocrimp coaxial contact • The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. • This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire.