Datasheet

ManualsBrandsSouriau ManualsConnectorsCrimp socket Female 18...16 AWG

SM/SC-M Stamped contacts

How to order

(L)

Contact type: SM: Male contact

SC : Female contact

AWG Size: 14, 16, 20, 24

Type of crimp barrel: American open crimp barrel

Packing: No digit: Contacts on strip (qty 3000 per reel)

L: Preformed loose piece contacts

Design variation 1 : Only wire crimp for size 14 and 16

: Wire + insulation crimp for sizes 20 and 24

11 : Wire + insulation crimp for size 16

Plating indication: See plating table

Size 16 stamped and

formed contacts for

TRIM TRIO connectors

Description

Size 16 SM/SC .063” (1.6mm) diameter

contacts are two piece strip formed crimp

snap-in pin and sockets.

These contacts consist of a crimp body

made of high conductive copper alloy, and

a stainless steel retaining spring featuring

retention in the housing cavity and a closed

entry socket to prevent probe damage.

The contact with its open barrel is standard

available on srtip and packaged with 3000

pcs on reel. This reel packaging combined

with semi or even full automatic crimp

tooling provides the added advantage of a

lower installed cost.

Features and benefits

• Made from high conductive copper alloy

with gold or tin over nickel plate finish.

• Two piece construcion with dual purpose

spring which serves for contact retention

and protects the body against damage.

• Contacts available on reel (standard) and

in bulk packing (100 pcs).

• Suitable for high volumes and lower

installation cost.

Performance characteristics

Current rating: 13 Amp

Contact resistance:  6 mΩ

Contact retention in body: 65 N min.

Individual insertion force: 3.5 N max.

Individual withdrawal force: 0.55 N min.

Construction

Contact body: High conductive copper

alloy.

Outer spring: Stainless steel

Plating table

S6 = 0.75m Gold min. in contact area,

flash on crimp barrel over Nickel.

D70 = Gold flash all over, over Nickel.

TK6 = Preplated Tin all over.

Connector accommodation

Any TRIM TRIO contact can be used in any

contact position in any connector in the

TRIM TRIO interconnection system.

• MS-M / MSG Rectangular connectors

• SMS Qikmate

• G - Bantamate

• UT-Bantam

• UTG Metalok bantam

• UTP Full plastic bantam

• UTGS Shielded bantam

• MBG Bantamate II

Summary of content (5 pages)

PAGE 1
SM/SC-M Stamped contacts Size 16 stamped and formed contacts for TRIM TRIO connectors Description Size 16 SM/SC .063” (1.6mm) diameter contacts are two piece strip formed crimp snap-in pin and sockets. These contacts consist of a crimp body made of high conductive copper alloy, and a stainless steel retaining spring featuring retention in the housing cavity and a closed entry socket to prevent probe damage. The contact with its open barrel is standard available on srtip and packaged with 3000 pcs on reel.
PAGE 2
SM/SC-M Stamped contacts Standard SM/SC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063”) Dimensional table Part number: contacts on strip Part number: Loose piecesmn Pin contacts Fig. SM24M1S6 SM24ML1S6 SM20M1S6 SM20ML1S6 SM16M1S6 SM16ML1S6 SM16M11S6 SM16ML11S6 SM14M1S6 SM14ML1S6 1 3 5 7 9 Wire size Socket contacts SC24M1S6 SC24ML1S6 SC20M1S6 SC20ML1S6 SC16M1S6 SC16ML1S6 SC16M11S6 SC16ML11S6 SC14M1S6 SC14ML1S6 Fig. AWG mm2 Insulation diameter Wire strip length 2 26 - 24 0.13 - 0.
PAGE 3
RM/RC - Machined contacts Size 16 solid machined contacts for TRIM TRIO connectors Description Size 16 RM/RC .063” (1.6mm) diameter contacts are precision solid machined crimp snap-in pin and sockets for heavy duty top performance requirements. Springs on both contacts are made of spring-tempered, heat-treated, berylium copper. The socket inner spring supplies high contact pressure to ensure low-resistance contact between pin and socket. The socket contact features closed entry to prevent probe damage.
PAGE 4
RM/RC - Machined contacts Standard RM/RC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063”) Dimensional table Pin contacts Part number Fig. Socket contacts Standard RM28M1(*) RM24M9(*) RM20M14(*) RM20M13(*) RM20M12(*) RM16M23(*) RM16M23GE1(*) RM16M31(*) RM14M50(*) RM14M30(*) 1 2 3 4 5 5 Wire size AWG mm2 Max. wire dia. Max. insul. dia. 6 7 30-28 26-24 0.05-0.08 0.13-0.20 0.55 0.8 8 22-20 0.32-0.52 1.18 20-16 0.52-1.50 1.80 Fig. Wire strip length O.D. 1.1 1.6 2.6 1.8 2.2 4.
PAGE 5
RM/RC - Machined contacts Special RM / RC contacts: Contact size 16 - Pin diameter 1.6mm (.063”) Part number Pin contacts RM16MSC(*) RM16SEO(*) RM20M12G4(*) RM20M12E8(*) Fig. Socket contacts 1 1 2 5 RC16MSC(*) RC16SE4(*) RC20M12G4(*) RC20M12E8(*) RC20M12E83(*) RC20M12E84(*) RM20M12G50(*) 4 RC20M12G50(*) RM20M12G60(*) 3 RC20M12G60(*) (*) Plating indication : See plating table. Wire size Fig.