Datasheet
RM/RC - Machined contacts
82
Standard RM/RC crimp contacts: Contact size 16 - Pin diameter 1.6mm (.063â)
Dimensional table
Part number Wire size Max. Max. Wire
Pin contacts Fig. Socket contacts Fig. AWG mm
2
wire insul. strip O.D. L1 L2
dia. dia. length
Standard RCS-Type
RM28M1(*) 1 RC28M1(*) -- 6 30-28 0.05-0.08 0.55 1.1 1.90
RM24M9(*) 2 RC24M9(*) RCS24M9(*) 7 26-24 0.13-0.20 0.8 1.6 2.55
RM20M14(*) RC20M14(*) RCS20M14(*) 2.6 4.8 3.10
RM20M13(*) 3 RC20M13(*) RCS20M13(*) 8 22-20 0.32-0.52 1.18 1.8 2.92 26.2 18.2
RM20M12(*) RC20M12(*) RCS20M12(*) 2.2 2.92
RM16M23(*) RC16M23(*) RCS16M23(*) 9
RM16M23GE1(*) 4 RC16M23GE1(*) -- 9 20-16 0.52-1.50 1.80 2.55 27.2 19.7
RM16M31(*) -- -- - 3.2 7.1 28.4 --
RM14M50(*) 5 RC14M50(*) RCS14M50(*) 10 14 2 2.05 3.10
RM14M30(*) 5 RC14M30(*) -- 10 -- 2,5 2.28 3.10 26.2 18.2
(*) Plating indication : See plating table
For machined contact reeled on plastic carrier: put âKâ in front of part number e.g. KRM16M23K
Crimptooling table
Hand crimp tooling for loose contacts Automatic crimp tooling
for contacts on strip
Size Hand tools MH860 M10S1 M8ND P100MAN (Press) Extraction
die set Positioner Locator Die set Stop Die set Left side Stripper tools
included setting bushing applicator unit
KRM/KRC
(not incl.) (not incl.) (not incl.) (not incl.) (not incl.) (not incl.)
28-1 4/6 S9 N24RT10 --
24-9 MH86164G 5/6 SL40 MLSP2763 Consult
20-12/13 Y16RCM 5/7 S10 N20RT30 MLSP2764 Factory RX2025GE1
16-23 6/8 SL39 N16RT21 or
16-GE1 MH86186 S3D1 SL115 N16RT25 MLSP2765 RX2025GE2
16-31------ -- or
20-14 -- MH86164G 5/7 S10J SL40J N20RT30J -- RX16D11D1
14-50 -- -- S3-14 SL39 -- --
14-30 AF8 +
TP120 -- -- -- -- -- --
For detailed information on crimp tooling : See crimp tooling section