Datasheet

17
Quick Mating PC
board mount
connectors
Description
These PC board mount connectors enable
Quick Mating and preassembled TRIM TRIO
contacts to be PC board mounted, using
conventional solder production techniques.
They will then mate and latch with the standard
Quick Mating plugs.
Straight board mount connectors is available
in 10 insert arrangements from 2 to 36 positions.
Right angled board mount Quick Mating is
available in 3, 6, 12 and 18 positions.
All board mount connectors are supplied fully
loaded with pin or socket contacts, either
in solid machined or stamped and formed
contacts.
Stamped and formed contact have selective tin
plating on the solder tails, thus eliminating flux
operations.
Features and benefits
• Straight versions available in 10 contact
arrangements from 2 to 36 positions
• Right angled versions available in 3, 6, 12
and 18 positions.
• All versions are available with:
- Pin or socket contacts
- Stamped and formed or solid machined
contacts.
• Board mount connectors have discrimination
cavities in between contact cavities, unless
other wise noted.See instruction page 27.
• UL recognized File Nr.: E238675
• CSA certififed File Nr.: LR44961-21
Environmental
• Operating temperature: -55°C to +105°C
• Insulation resistance: 5000 MΩ min.
• Test potential: 2000 VAC
• Current rating for SMS PCB version:
- 5 Amp for stamped and formed contacts
- 7.5 Amp for machined contacts
• Electrical performances for crimped versions:
UL: 250V - 15A
CSA: 250V - 15A
• Durability: 500 matings and unmatings
• Sealing performances: IP40
Material
• Connector body:
Glass filled thermoplast UL94 V0
• Railway version :
HL2/R22 - HL2/R23 following EN 45 545-2
• Contacts:
High conductive copper alloy
• Soldering information:
compatible with wave soldering up to 245°C.
Not compatible with reflow soldering.
Plating table
• Plating for solid machined contacts:
- Made for 2.4mm or 3.2mm PCB thickness
(straight contacts) and for 3.2mm PCB
thickness (right contacts)
K9 (std) = Min. 0.4µ Gold in contact area,
Tin on solder tail, over Nickel
J9 = Gold ash in contact area,
Tin on solder tail, over Nickel
T = 3 - 5µ Tin all over
• Plating for Stamped and formed contacts:
- Made for 2.4mm PCB thickness (straight
contacts) and for 3.2mm PCB thickness
(right contacts)
K9 = Min. 0.4µ Gold in contact area,
3- 5µ Tin on solder tail, over Nickel
T = 3 - 5µ Tin all over
- Made for 3.2mm PCB thickness (straight contacts)
S6 = Min. 0.75µ Gold in contact area
Gold ash on solder tail, over Nickel
D70 = Gold ash all over
TR29 = 3 - 5µ Tin all over
Intermateability
• “SMS” Quick Mating board mount
connectors with preassembled TRIM TRIO
size 16 board mount contacts are
intermateable only with the “SMS” Quick
Mating cable plug connectors equipped
with TRIM TRIO crimp type removable
snap-lock contacts (see contact section).
Ordering information
Connector family SMS 12 GE 3 0 K9
Layout: see page 12
Body variation:
GE: Solid machined contacts (2.4mm or 3.2mm, see option below)
SE: Stamped and formed contacts for 2.4mm PCB
RE: Stamped and formed contacts for 3.2mm PCB
Design variation:
3: Straight board mount with female contact
4: Straight board mount with male contacts
5: Right angle board mount with female contacts
6: Right angle board mount with male contacts
Option:
-: 2.4mm for GE3, GE4 and SE variation
0: 3.2mm for GE variation
3: Railway version: HL2/R22 - HL2/R23 following EN 45 545-2
Plating indication
SMS Series
|
Board mount Quick Mating (Pitch: 5.08mm)
Connector