Datasheet

144
Shell size
10 12 14 16 18 20 22 24
Screws tightening
torque (Nm)
0.30/0.40 0.30/0.40 0.30/0.40 0.30/0.40 0.35/0.45 0.50/0.60 0.55/0.65 0.55/0.65
• Strip wires and crimp contacts (see pages 140 & 141)
• Insert contacts into connector cavities (insert manually or use tool RTM2
0 5 crimp contacts)
• Place receptacle in the panel cut-out
• Secure receptacle with screws (not supplied)
Tighten screws: M2.5 for size connectors 10 to 22, M3 for size connectors 24
(recommended torque: see table below)
• For complete sealing of the system use optional gasket and sealed screw solution (not sold by SOURIAU).
Gasket (optional)
Rearmounting:Crimpversion
Panelthickness:
2.5mm max
Receptacle ange
3mm max
UTO 0 Assembly (Mounting Suggestion)
Assembly Instructions
Frontmounting:Crimpversion
Gasket (optional)
Panel
Receptacle
ange
3mm max
UTO Series
|
Technical Information