Datasheet

180
In applications where similar connectors are used next to each other,
mismatching can cause disturbances, system failure or even danger to
operating personnel.
To eliminate mismatching, all Trim Trio® connectors are offered with
discrimination keys to avoid interconnection system errors. In addition,
the connector insert can also be rotated inside the shell to create custom
keying options.
Connectors with rotated inserts can be ordered by adding the sufx W, X,
Y or Z to the standard part number.
e.g.
UT0W0106PH (standard key)  UT0W0106PWH (W key)
Consult us for overmoulded harnesses.
Shell size Layout
Discrimination key degrees
W X Y Z
10
103 - - - -
102W2 - - - -
104 45° - - -
103W3 - - - -
106 90° - - -
12
124 - - - -
128 26° - - -
1210 60° 155° 270° 295°
14
142G1 - - - -
147 - - - -
148 - - - -
1412 60° - - -
1492 49° 71° 145° -
1419 30° 165° 315° -
16
1619 30° 165° - 315°
1626 60° - 275° 338°
18
1823 - 158° - 270°
1832 85° 138° 222° 265°
20
2028 79° - 259° -
2030 34° 90° 123° 259°
2041 45° 126° 225° -
22
2235 13° 162° 198° 265°
2238 15° 47° 150° 331°
2255 30° 142° 226° 314°
24
2448 60° 120° 189° 351°
2461 90° 180° 270° 324°
Discrimination/Keying Methods
SMSPKE0 (only for UTO layouts using #16 contacts)
When one of these dummy contacts is used, the UTO connector
will only mate with a connector which has a vacant cavity at the
corresponding position.
The material used is polyamide 6.6.
SMSPKE0
UTO Series
|
Appendices