Datasheet

ManualsBrandsSouriau ManualsCircular ConnectorsCable plug Trim Trio UTS Poles=7 Male Housing size14

UTS SERIES

Waterproof Plastic Connectors

IP68 and IP69K

Summary of content (216 pages)

PAGE 1
UTS SERIES Waterproof Plastic Connectors IP68 and IP69K
PAGE 2
PAGE 3
Overview UTS Series | Connector Contents Contacts Connector Overmoulded Cable Assembly ......................... 2 contacts .......................................................... 2 + ground contacts .......................................... 3 contacts .......................................................... 3 + ground contacts .......................................... 4 contacts .......................................................... 5 contacts .................................................
PAGE 5
UTS Series Overview Typical Applications ................................................................................................. 06 Features & Benefits ................................................................................................. 07 Range Overview ..................................................................................................... 08 Layouts ..................................................................................................................
PAGE 6
© cachoudesign / Fotolia Energy - Power Instrumentation - Measurement Stage - Light 6 © Pinosub / Fotolia © krungchingpixs / Fotolia Off-Road Rail © Volodymyr Kyrylyuk / Fotolia © Sergey Milovidov / Fotolia © Vibe Images / Fotolia UTS Series | Overview Typical Applications Building Automation & Control
PAGE 7
UTS Series | Overview Features & Benefits IP68/69K Dynamic Mated & Unmated Ideal for outdoor and indoor dynamic applications requiring continuous underwater immersion, routine pressure washing and dust protection. Overview WATER PROOF No Degradation Over Time UV RESISTANT No mechanical deterioration or important variation in colour after 5 years of exposure in natural environment (equivalent exposure to sun and moisture as per ISO4892) and F1 rated per UL 746C.
PAGE 8
UTS Series | Overview Range UTS Standard UTS Series Cable Sealed Single Wire Sealed Sealed: IP68/69K dynamic UV resistant UL/IEC compliant UTS Backshells Corrosion-proof Plastic housing Contacts Supplied Separately Cable Sealing Choice of Crimp Contacts • Machined • Stamped and Formed • Coaxial Plug PCB Contacts Double Sealing (Wires + Cable) Fiber Optic Contacts Loaded Screw Termination Grommet Single Wire Sealed Flexible conduit adaptators Contact us for more information Overmoulded Cable A
PAGE 9
UTS Series | Overview Overview UTS Standard Receptacle Contacts Supplied Separately UTS Backshells Choice of Crimp Contacts • Machined • Stamped and Formed • Coaxial Overview Square Flange Cable Sealing PCB Contacts Threaded Receptacle Fiber Optic Contacts Supplied Separately Double Sealing (Wires + Cable) Choice of Crimp Contacts • Machined • Stamped and Formed • Coaxial In-line Grommet PCB Contacts Single Wire Sealed Fiber Optic Contacts Loaded Jam Nut Flexible conduit adaptators Screw Te
PAGE 10
UTS Series | Overview Layouts Shell Size (Electrical parameter according to IEC) Contact #16 (Ø 1.6mm) Contact #20 (Ø 1.
PAGE 11
UTS Series | Overview Shell Size Contacts #16: from AWG 30 to 14 0.05 to 2.5 mm² Contact #16 (Ø 1.6mm) 147(3) 14E7/14D7 14E5/14D5 16A 150V 5 contacts 16A 300V 6+ground Page 72 Page 92 1412(3) 1492(3) Contacts #12: from AWG 22 to 12 0.13 to 4 mm² Contact #20 (Ø 1.0mm) 14E18/14D18 5A 50V 18 contacts Page 136 14 10A 63V 12 contacts 10A 63V 12 contacts Contact #8 (Ø 3.6mm) Contacts #8: from AWG 16 to 8 1.5 to 10 mm² Mixed Power 148 142G1(2) 40A 300V 2+ground 17A 230V 8 contacts 4xØ1.
PAGE 12
UTS Series | Overview General Technical Characteristics Materials Environmental Electrical • Body connector + Backshell: Thermoplastic • Operating temperature: from -40°C to +105°C 40/100/21 per NFF 61-030 • In accordance with: - UL 1977: Certificat ECBT2 File number: E169916 - CSA C22.2 n°182.
PAGE 13
Overview UTS Series | Overview 13
PAGE 15
UTS Series Connector Overmoulded Cable Assembly ............................................................................... 2 contacts 8E2/8D2: 7A 32V.................................................................. 12E2/12D2: 16A 150V.................................................................. 2 contacts + ground 103: 16A 300V.................................................................. 142G1: 40A 300V..................................................................
PAGE 16
UTS Series | Connector Overmoulded Cable Assembly SOURIAU has provided connectors in various applications for more than 90 years and used in the most extreme environments. Conscious about the difficulty to finding a quick and a reliable harness manufacturer, we began in-house cable assembly production. It allows customers to reduce the number of suppliers, and to take advantage of the "best in class" quality of the SOURIAU group.
PAGE 17
UTS Series | Connector Overmoulding Description O-ring Compound Overmoulding adapter Cable outer sheath PVC or PUR overmoulding Connector Thermoplastic or elastomer insert Connector with cable gland backshell If cable jacket is breached... GOOD ...water ingress unhampered, leading to damage. Overmoulded connector If cable jacket is breached... BEST ...prevents water ingress via capillary action.
PAGE 18
UTS Series | Connector UTS Waterproof Plastic Overmould HAUTS Standard Offering Description Cable • PVC outer sheath (grey color) • Wire section 1.5 mm² for #16 contact • Wire section 0.5 mm² for #20 contact • 300V • Unshielded • Flammability rating IEC (UL1581 Sec.
PAGE 19
UTS Series | Connector Cable Information Range of temperature: Occasional flexing: -5°C up to +70°C Fixed installation: -40°C up to +80°C Rated voltage: U0/U: 300/500V Wire section : Layouts with #16 contact: wire section 1.5 mm² Layouts with #20 contact: wire section 0.5 mm² Harmonized reference: H05 VV - F XX Standardisation of European Cable - DIN VDE 0281/DIN VDE 0282/DIN VDE 0292 1 2 3 4 5 6 Connector Harmonized wire coding system 7 8 9 1. Basic type 2. Working voltage 3.
PAGE 20
UTS Series | Connector 8E2/8D2 (Shell size 8, 2x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 23 PCB contacts loaded see page 23 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig.1) UTS08E2P UTS08E2S Without (Fig.7) UTS68E2P UTS68E2S Cable gland (Fig.8) UTS6JC8E2P UTS6JC8E2S Jam nut receptacle Without (Fig.4) UTS78E2P UTS78E2S M12 threaded receptacle Without (Fig.
PAGE 21
2 contacts 7A/32V UTS Series | Connector per IEC 61984 8E2/8D2 (Shell size 8, 2x#20) 2 Dimensions Square Flange Receptacle - UTS0 7.5 Fig. 1 20.7 Ø12 Ø12 22 7.7 8.7 15.3 11.7 M12 Threaded Receptacle - UTS7 7 mini 2.3 M12x1.5 5 Ø3.2 Front view Fig. 2 Front view Fig. 3 Jam Nut Receptacle - UTS7 3.4 3.4 4.2 3.5 24.2 Ø12 18 Ø12 18 Ø12 18 3.5 Fig. 4 3.5 Fig.5 Front view Fig. 6 Plug - UTS6 25.3 24.2 3.4 3.7 mini Mated Connector Lengths Fig. 7 61.1 Ø22.
PAGE 22
UTS Series | Connector 8E2/8D2 (Shell size 8, 2x#20) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP40 Part number Part number Part number Part number UTS8DCG UTS8DCGR UTS8DCGE UTS68C Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 22 Plug Protective Cap Receptacle cap Plug cap 85005585A 85005594 Part numbers UTFD11B Part numbers R for Red Receptacles Plugs UTS78CCRR
PAGE 23
2 contacts 7A/32V UTS Series | Connector per IEC 61984 8E2/8D2 (Shell size 8, 2x#20) 2 #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 Electrical Characteristics UTS 8E2/8D2 Derating Curves Current (A) 18 UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.
PAGE 24
UTS Series | Connector 12E2/12D2 (Shell size 12, 2x#16) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 27 PCB contacts loaded see page 27 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig.1) UTS012E2P UTS012E2S Without (Fig.6) UTS612E2P UTS612E2S Cable gland (Fig.7) UTS6JC12E2P UTS6JC12E2S Jam nut receptacle Without (Fig.
PAGE 25
2 contacts 16A/150V UTS Series | Connector per IEC 61984 12E2/12D2 (Shell size 12, 2x#16) 2 Dimensions Square Flange Receptacle - UTS0 7.5 7.5 8.1 mini 26.4 Ø19 20.8 11.3 Ø19 11.3 2.3 Ø3.2 2.3 Fig. 1 Front view Fig. 2 Jam Nut Receptacle - UTS7 3 3 4.7 mini 3 31.9 Ø19 3.5 3.5 Fig. 3 3.5 Fig. 4 Front view Fig. 5 Plug - UTS6 25.3 27.2 4.2 18 Ø19 18 Ø19 18 Mated Connector Lengths Fig. 6 77.6 Ø30.1 UTS0 UTS7 66.7 81.7 Fig.
PAGE 26
UTS Series | Connector 12E2/12D2 (Shell size 12, 2x#16) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR UTS12DCGE UTS612DCG Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 26 Plug Sealing Cap Receptacle cap Plug cap 85005587A 85005596 Part numbers UTFD13B Part numbers R for Red Receptacles Plugs
PAGE 27
2 contacts 16A/150V UTS Series | Connector per IEC 61984 12E2/12D2 (Shell size 12, 2x#16) 2 #16 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 18 to 14 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 Electrical Characteristics UTS 12E2/12D2 Derating Curves Current (A) UL 13A 600V UL94 HB CSA 13A 600V UL94 HB IEC 16A 150V 2.
PAGE 28
UTS Series | Connector 103 (Shell size 10, 2 + ground, 3x#16) Layout OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 31 PCB contacts supplied separately see page 31 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 1) UTS1JC103P UTS1JC103S Without (Fig. 2) UTS6103P UTS6103S Cable gland (Fig. 3) UTS6JC103P UTS6JC103S Jam nut receptacle Without (Fig.
PAGE 29
2 + ground 16A/300V UTS Series | Connector per IEC 61984 103 (Shell size 10, 2 + ground, 3x#16) Dimensions 2+ Free Hanging - UTS1 Ø15.1 70 Fig. 1 Plug - UTS6 33 63.2 Ø26.2 Male Female 25.3 Fig. 2 Fig. 3 Jam Nut Receptacle - UTS7 Mated Connector Length - UTS7 27.2 Ø15.1 18.3 12.3 3.5 Fig. 4 77.3 22.5 Panel Cut Out Drilling Pattern Hole size: 1.3mm 17.43 1.5 16.55 3 Jam Nut Receptacle - UTS7 2.6 Note: Overmoulded cable assembly dimensions available page 179. 2.
PAGE 30
UTS Series | Connector 103 (Shell size 10, 2 + ground, 3x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR Shandles Toolkit Plug Sealing Cap Extraction Tool #16 Crimp Tooling (without Shandles) IP68/69K Part number Part number UTS610DCG RX2025GE1 Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005586A 85005595 Color Coding Rings
PAGE 31
2 + ground 16A/300V UTS Series | Connector per IEC 61984 103 (Shell size 10, 2 + ground, 3x#16) Contacts #16 2+ Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 32
UTS Series | Connector 142G1 (Shell size 14, 2 + ground, 3x#8) Layout OR OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 35 PCB contacts supplied separately see page 35 Connector type Backshell Square flange receptacle Free hanging receptacle Part number Male insert Female insert Without (Fig. 1) UTS0142G1P - Cable gland (Fig. 6) UTS1JC142G1P UTS1JC142G1S Without (Fig. 3) UTS6142G1P UTS6142G1S Cable gland (Fig.
PAGE 33
2 + ground 40A/300V UTS Series | Connector per IEC 61984 142G1 (Shell size 14, 2 + ground, 3x#8) Dimensions 2+ Square Flange Receptacle - UTS0 28.8 23.2 Ø22.3 2.3 35.1 3.5 Ø3.2 Ø3.2 Front view Fig. 1 Fig. 1 1.6 18 Ø22.3 21.9 11.3 Jam Nut Receptacle - UTS7 30.4 Fig. 2 Plug - UTS6 35 71.5 Ø35.1 Male Female 32.1 Fig. 3 Fig. 4 NPT Threaded Receptacle - UTS7 35.3 Free Hanging - UTS1 78.5 Ø22.3 25.4 Ø22.3 25.4 23.1 NPT - 1/2˝ Fig. 6 Fig. 5 Panel Cut Out Hole size: 3.
PAGE 34
UTS Series | Connector 142G1 (Shell size 14, 2 + ground, 3x#8) Accessories and Tooling Jam Nut or NPT Threaded Receptacle Sealing Caps IP68/69K Hand Tool Metal terminal IP68/69K Part number Part number UTS14DCG UTS14DCGR Part number M317 Plug Sealing Cap Positioner + Locator Setting #8 IP68/69K Part number UTS614DCG Plastic Protective Cap Gasket Part number VGE10078A Part numbers Receptacle cap Plug cap 85005588A 85005597 Part numbers UTFD14B Extraction Tool #8 Color Coding Rings G fo
PAGE 35
2 + ground 40A/300V UTS Series | Connector per IEC 61984 142G1 (Shell size 14, 2 + ground, 3x#8) Contacts PCB Crimp #8 2+ Contact type Machined Machined (2) AWG Part number Male Max wire Ø Female Max insulator Ø 16 82913601A(1) 82913600A(1) 1.72 mm (1) 14 82913603A 82913602A 2.22 mm 12 82913605A(1) 82913604A(1) 2.82 mm 10 82913607A (1) 82913606A 3.50 mm 8 82913609A(1) 82913608A(1) 4.35 mm - 82911685NPC(1) 82911684NPC(1) - (1) (1) 6.
PAGE 36
UTS Series | Connector 8E3/8D3 (Shell size 8, 3x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 39 PCB contacts loaded see page 39 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 1) UTS08E3P UTS08E3S Without (Fig. 7) UTS68E3P UTS68E3S Cable gland (Fig. 8) UTS6JC8E3P UTS6JC8E3S Jam nut receptacle Without (Fig. 4) UTS78E3P UTS78E3S M12 threaded receptacle Without (Fig.
PAGE 37
3 contacts 7A/32V UTS Series | Connector per IEC 61984 8E3/8D3 (Shell size 8, 3x#20) Dimensions Square Flange Receptacle - UTS0 7.5 Fig. 1 20.7 Ø12 Ø12 7 mini 2.3 3 22 7.7 8.7 15.3 11.7 M12 Threaded Receptacle - UTS7 M12x1.5 5 Ø3.2 Front view Fig. 2 Front view Fig. 3 Jam Nut Receptacle - UTS7 3.4 3.4 3.4 24.2 Ø12 3.5 3.5 Fig. 4 24.2 4.2 18 Ø12 18 Ø12 18 3.7 mini 3.5 Fig. 5 Front view Fig. 6 Plug - UTS6 Mated Connector Lengths Fig. 7 61.1 25.3 Ø22.
PAGE 38
UTS Series | Connector 8E3/8D3 (Shell size 8, 3x#20) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP40 Part number Part number Part number Part number UTS8DCG UTS8DCGR UTS8DCGE UTS68C Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 38 Plug Protective Cap Receptacle cap Plug cap 85005585A 85005594 Part numbers UTFD11B Part numbers R for Red Receptacles Plugs UTS78CCRR
PAGE 39
3 contacts 7A/32V UTS Series | Connector per IEC 61984 8E3/8D3 (Shell size 8, 3x#20) Contacts Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder 3 Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB #20 Machined (1) Min 0.4µ gold over 0.
PAGE 40
UTS Series | Connector 8E3A/8E98 - 8D3A/8D98 (Shell size 8, 3x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Square flange receptacle Without (Fig. 1) Without (Fig. 7) Handsolder electrical contacts loaded see page 43 PCB contacts loaded see page 43 Plug Cable gland (Fig. 8) Jam nut receptacle Without (Fig. 4) M12 threaded receptacle Without (Fig. 3) Square flange receptacle Without (Fig.
PAGE 41
3 contacts 7A/50V UTS Series | Connector per IEC 61984 8E3A/8E98 - 8D3A/8D98 (Shell size 8, 3x#20) Dimensions Square Flange Receptacle - UTS0 7.5 Fig. 1 20.7 Ø12 Ø12 7 mini 2.3 3 22 7.7 8.7 15.3 11.7 M12 Threaded Receptacle - UTS7 M12x1.5 5 Ø3.2 Front view Fig. 2 Front view Fig. 3 Jam Nut Receptacle - UTS7 3 3 3 24.2 Ø12 3.5 3.5 Fig. 4 3.5 Fig. 5 Front view Fig. 6 Plug - UTS6 25.3 24.2 4.2 18 Ø12 18 Ø12 18 3.7 mini Mated Connector Lengths Fig. 7 61.1 Ø22.
PAGE 42
UTS Series | Connector 8E3A/8E98 - 8D3A/8D98 (Shell size 8, 3x#20) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP40 Part number Part number Part number Part number UTS8DCG UTS8DCGR UTS8DCGE UTS68C Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 42 Plug Protective Cap Receptacle cap Plug cap 85005585A 85005594 Part numbers UTFD11B Part numbers R for Red Receptacles Plu
PAGE 43
3 contacts 7A/50V UTS Series | Connector per IEC 61984 8E3A/8E98 - 8D3A/8D98 (Shell size 8, 3x#20) Contacts Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder 3 Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB #20 Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 Electrical Characteristics UTS 8E3A/98 - 8D3A/98 Derating Curves Current (A) 18 UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.
PAGE 44
UTS Series | Connector 8E33/8D33 (Shell size 8, 3x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Square flange receptacle Female insert Without (Fig. 1) UTS08E33P UTS08E33S Without (Fig. 7) UTS68E33P UTS68E33S Cable gland (Fig. 8) UTS6JC8E33P UTS6JC8E33S Jam nut receptacle Without (Fig. 4) UTS78E33P UTS78E33S M12 threaded receptacle Without (Fig. 3) UTS78E33PM12 UTS78E33SM12 Square flange receptacle Without (Fig.
PAGE 45
3 contacts 7A/50V UTS Series | Connector per IEC 61984 8E33/8D33 (Shell size 8, 3x#20) Dimensions Square Flange Receptacle - UTS0 7.5 Fig. 1 20.7 Ø12 Ø12 7 mini 2.3 3 22 7.7 8.7 15.3 11.7 M12 Threaded Receptacle - UTS7 M12x1.5 5 Ø3.2 Front view Fig. 2 Front view Fig. 3 Jam Nut Receptacle - UTS7 3.4 3.4 4.2 24.2 Ø12 Ø12 3.5 3.5 Fig. 4 24.2 3.4 18 18 Ø12 18 3.7 mini 3.5 Fig. 5 Front view Fig. 6 Plug - UTS6 Mated Connector Lengths Fig. 7 61.1 25.3 Ø22.
PAGE 46
UTS Series | Connector 8E33/8D33 (Shell size 8, 3x#20) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP40 Part number Part number Part number Part number UTS8DCG UTS8DCGR UTS8DCGE UTS68C Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 46 Plug Protective Cap Receptacle cap Plug cap 85005585A 85005594 Part numbers UTFD11B Part numbers R for Red Receptacles Plugs UTS78CCR
PAGE 47
3 contacts 7A/50V UTS Series | Connector per IEC 61984 8E33/8D33 (Shell size 8, 3x#20) Contacts Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder 3 Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB #20 Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 Electrical Characteristics UTS 8E33/8D33 de-rating curves Current (A) 18 UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 50V 1.
PAGE 48
UTS Series | Connector 12E3/12D3 (Shell size 12, 3x#16) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 51 PCB contacts loaded see page 51 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS012E3P UTS012E3S Without (Fig. 1) UTS612E3P UTS612E3S Cable gland (Fig. 2) UTS6JC12E3P UTS6JC12E3S Jam nut receptacle Without (Fig.
PAGE 49
3 contacts 16A/150V UTS Series | Connector per IEC 61984 12E3/12D3 (Shell size 12, 3x#16) Dimensions Plug - UTS6 25.3 66.7 Ø30.1 3 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 4.7 mini 3 3.5 Fig. 3 4.2 Ø19 31.9 18 Ø19 18 Ø19 18 27.2 3 3.5 Fig. 4 3.5 Fig. 5 Square Flange Receptacle - UTS0 Fig. 7 11.3 7.5 8.1 mini Front view Mated Connector Lengths 26.4 77.6 Ø19 20.8 UTS0 UTS7 81.7 2.3 Ø3.2 Front view Fig. 6 Panel Cut Out Square Flange Receptacle - UTS0 Ø3.
PAGE 50
UTS Series | Connector 12E3/12D3 (Shell size 12, 3x#16) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR UTS612DCG UTS12DCGE Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 50 Square Flange Sealing Cap Receptacle cap Plug cap 85005587A 85005596 Part numbers UTFD13B Part numbers R for Red Receptacles Plugs
PAGE 51
3 contacts 16A/150V UTS Series | Connector per IEC 61984 12E3/12D3 (Shell size 12, 3x#16) Contacts Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder 3 Loaded in the connector Min 0.4µ gold over 0.8µ Ni 18 to 14 5 mm PCB #16 Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 Electrical Characteristics UTS 12E3/12D3 Derating Curves Current (A) UL 13A 600V UL94 HB CSA 13A 600V UL94 HB IEC 16A 150V 2.
PAGE 52
UTS Series | Connector 124 - 12E4/12D4 (Shell size 12, 3 + ground, 4x#16) Layout OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 55 Connector type Backshell Square flange receptacle Without (Fig. 1) Jam nut receptacle Without (Fig. 4) Free hanging receptacle Cable gland (Fig. 12) Plug Cable gland (Fig. 11) Without (Fig. 3) Jam nut receptacle with stand off and without hold down clip Without (Fig.
PAGE 53
3 + ground 16A/300V UTS Series | Connector per IEC 61984 124 - 12E4/12D4 (Shell size 12, 3 + ground, 4x#16) Dimensions Square Flange Receptacle - UTS0 7.5 11.3 11.3 7.5 8.1 mini 11.3 7.5 26.4 2.3 20.8 Ø19 Ø19 Ø19 3+ 2.3 2.3 Fig. 1 Fig. 2 Ø3.2 Front view Fig. 3 Jam Nut Receptacle - UTS7 Fig. 4 18 Fig. 6 2.4 Fig. 8 2.4 18 18 31.9 Hold down clip Ø19 Ø19 Ø19 Male 27.2 4.2 Female 3.5 3.5 Fig. 5 3.5 Fig. 7 Front view Fig. 9 Free Hanging - UTS1 / Plug - UTS6 Fig.
PAGE 54
UTS Series | Connector 124 - 12E4/12D4 (Shell size 12, 3 + ground, 4x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS612DCG UTS12DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug c
PAGE 55
3 + ground 16A/300V UTS Series | Connector per IEC 61984 124 - 12E4/12D4 (Shell size 12, 3 + ground, 4x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece PCB Max insulator Ø 0.55 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K(1) RC20M12K(1) 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 56
UTS Series | Connector 183G1 (Shell size 18, 3 + ground, 4x#8) Layout WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 59 PCB contacts supplied separately see page 59 56 Connector type Backshell NPT threaded receptacle Part number Male insert Female insert Without (Fig. 1) - UTS7183G1SNPT Plug Without (Fig. 2) UTS6183G1P - Plug Cable gland (Fig. 3) UTS6JC183G1P - NPT threaded receptacle Without (Fig. 1) - UTS7183G1SNPT Plug Without (Fig.
PAGE 57
3 + ground 32A/300V UTS Series | Connector per IEC 61984 183G1 (Shell size 18, 3 + ground, 4x#8) Dimensions NPT Threaded Receptacle - UTS7 17.3 14.5 31.8 Ø19.6 Ø28.6 3+ NPT - 3/4˝ Fig. 1 Plug - UTS6 81.3 Fig. 2 Fig. 3 Ø42 37.5 Mated Connector Length - UTS6JC 90.5 Panel cut Drilling Pattern 5.1 5.1 5.1 NPT 5.1 .
PAGE 58
UTS Series | Connector 183G1 (Shell size 18, 3 + ground, 4x#8) Accessories and Tooling Jam Nut or NPT Threaded Receptacle Sealing Caps IP68/69K Hand Tool Metal terminal IP68/69K Part number Part number UTS18DCG UTS18DCGR Part number M317 Plug Sealing Cap Positioner + Locator Setting #8 IP68/69K Part number UTS618DCG Plastic Protective Cap Gasket Part number VGE10078A Extraction Tool #8 Part numbers Receptacle cap Plug cap 85005590A 85005599 Part numbers UTFD16B Color Coding Rings G f
PAGE 59
3 + ground 32A/300V UTS Series | Connector per IEC 61984 183G1 (Shell size 18, 3 + ground, 4x#8) Contacts PCB Crimp #8 Contact type Machined Machined (2) AWG Part number Male Max wire Ø Female Max insulator Ø 16 82913601A(1) 82913600A(1) 1.72 mm (1) 14 82913603A 82913602A 2.22 mm 12 82913605A(1) 82913604A(1) 2.82 mm 10 82913607A(1) 82913606A(1) 3.50 mm 8 82913609A(1) 82913608A(1) 4.35 mm - 82911685NPC(1) 82911684NPC(1) - (1) 3+ 6.
PAGE 60
UTS Series | Connector 8E4/8D4 (Shell size 8, 4x#20) Layout ayout OR OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 63 PCB contacts loaded see page 63 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 1) UTS08E4P UTS08E4S Without (Fig. 7) UTS68E4P UTS68E4S Cable gland (Fig. 8) UTS6JC8E4P UTS6JC8E4S Jam nut receptacle Without (Fig.
PAGE 61
4 contacts 7A/32V UTS Series | Connector per IEC 61984 8E4/8D4 (Shell size 8, 4x#20) Dimensions Square Flange Receptacle - UTS0 7.5 Fig. 1 20.7 Ø12 Ø12 22 7.7 8.7 15.3 11.7 M12 Threaded Receptacle - UTS7 4 7 mini 2.3 M12x1.5 5 Ø3.2 Fig. 2 Fig. 3 Front view Front view Jam Nut Receptacle - UTS7 3.4 3.4 3.4 24.2 Ø12 3.5 3.5 Fig. 4 3.5 Fig. 5 Fig. 6 Plug - UTS6 25.3 24.2 4.2 18 Ø12 18 Ø12 18 3.7 mini Front view Mated Connector Lengths Fig. 7 61.1 Ø22.
PAGE 62
UTS Series | Connector 8E4/8D4 (Shell size 8, 4x#20) Accessories Jam Nut Sealing Caps IP68/69K IP68/69K Square Flange Sealing Cap Metal terminal IP68/69K Metal terminal IP40 Part number Part number Part number Part number UTS8DCG UTS8DCGR UTS8DCGE UTS68C Plastic Protective Cap Gasket Color Coding Rings Part numbers G for Green Y for Yellow Part numbers 62 Plug Protective Cap Receptacle cap Plug cap 85005585A 85005594 Part numbers UTFD11B R for Red Receptacles Plugs UTS78CCRR
PAGE 63
4 contacts 7A/32V UTS Series | Connector per IEC 61984 8E4/8D4 (Shell size 8, 4x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4μ gold over 0.8μ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4μ gold over 0.8μ Ni - - 4 (1): For dimensions see page 169 Electrical Characteristics UTS 8E4/8D4 Derating Curves Current (A) 18 UL 7A 250V UL94 HB CSA 7A 250V UL94 HB IEC 7A 32V 1.
PAGE 64
UTS Series | Connector 102W2 (Shell size 10, 2x#20, 2x12) Layout WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 67 64 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 1) UTS1JC102W2P UTS1JC102W2S Plug Without (Fig. 2) UTS6102W2P UTS6102W2S Plug Cable gland (Fig. 3) UTS6JC102W2P UTS6JC102W2S Jam nut receptacle Without (Fig.
PAGE 65
4 contacts 25A/150V UTS Series | Connector per IEC 61984 102W2 (Shell size 10, 2x#20, 2x12) Dimensions Free Hanging - UTS1 Ø15.1 70 4 Fig. 1 Plug - UTS6 25.3 63.2 Ø26.2 Ø26.2 33 Fig. 2 Male Fig. 2 Female Jam Nut Receptacle - UTS7 2.4 Mated Connector Length - UTS7 27.2 Ø15.1 18.3 Fig. 3 3.5 Fig. 4 77.3 22.5 Panel Cut Out Drilling Pattern 17.43 3 16.
PAGE 66
UTS Series | Connector 102W2 (Shell size 10, 2x#20, 2x12) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Crimp Tooling #20 Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR Shandles Toolkit Plug Sealing Cap Extraction Tool #20 IP68/69K Part number Part number UTS610DCG RX20D44 Plastic Protective Cap Gasket Contacts Part number of head Contact size RM/RC 24W3K(1) RM/RC 20W3K(1) RM/RC 18W3K(1) SM/SC 24WL3(1)(2) SM/SC 20WL3(1)(2) S20RCM*
PAGE 67
4 contacts 25A/150V UTS Series | Connector per IEC 61984 102W2 (Shell size 10, 2x#20, 2x12) Contacts #20 Contact type Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece Part number Male Female Max wire Ø Max insulator Ø 26-24 RM24W3K RC24W3K 0.80 1.60 22-20 RM20W3K RC20W3K 1.15 1.60 20-18 RM18W3K RC18W3K 1.30 2.10 26-24 SM24W3TK6(1)(2) SC24W3TK6(1)(2) - 0.90-1.60 26-24 SM24W3S26 (1)(2) SC24W3S25 - 0.90-1.
PAGE 68
UTS Series | Connector 104 (Shell size 10, 4x#16) Layout OR OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Square flange receptacle Female insert Without (Fig. 1) UTS0104P UTS0104S Free hanging receptacle Cable gland and grommet (Fig. 2) UTS1GJC104P - Free hanging receptacle Nut and grommet (Fig. 3) UTS1GN104P - Free hanging receptacle Cable gland (Fig. 2) UTS1JC104P UTS1JC104S Plug Without (Fig.
PAGE 69
4 contacts 13A/150V UTS Series | Connector per IEC 61984 104 (Shell size 10, 4x#16) Dimensions Square Flange Receptacle - UTS0 10.5 Fig. 2 24 2.3 4 Ø3.2 Fig. 1 70 Ø15.1 18.5 Ø15.1 11.3 Free Hanging - UTS1 40.9 Front view Fig. 3 Plug - UTS6 33 63.2 32.5 Ø26.2 Male Female 25.3 Fig. 4 Fig. 5 Fig. 6 Jam Nut Receptacle - UTS7 18.3 41 2.4 Mated Connector Lengths Fig. 8 70.9 18.3 Ø15.1 Ø27.2 UTS0 UTS7 3.5 3.5 Fig. 7 77.3 70.7 Fig.
PAGE 70
UTS Series | Connector 104 (Shell size 10, 4x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS610DCG UTS10DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005586A 85005595
PAGE 71
4 contacts 13A/150V UTS Series | Connector per IEC 61984 104 (Shell size 10, 4x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 72
UTS Series | Connector 14E5/14D5 (Shell size 14, 5x#16) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 75 PCB contacts loaded see page 75 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS014E5P UTS014E5S Without (Fig. 1) UTS614E5P UTS614E5S Cable gland (Fig. 2) UTS6JC14E5P UTS6JC14E5S Jam nut receptacle Without (Fig.
PAGE 73
5 contacts 16A/150V UTS Series | Connector per IEC 61984 14E5/14D5 (Shell size 14, 5x#16) Dimensions Plug - UTS6 25.3 Ø35.1 71.5 Fig. 1 5 Fig. 2 Jam Nut Receptacle - UTS7 3 3 3.5 35.1 3.5 Fig. 3 3.5 Fig. 4 Front view Fig. 5 Square Flange Receptacle - UTS0 Mated Connector Lengths 28.8 7.5 8.1 mini 11.3 30.4 18 Ø22.3 Ø22.3 18 Ø22.3 18 4.8 mini 3 4.2 75 23.2 Ø22.3 UTS0 UTS7 2.3 82 Ø3.2 Fig. 6 Front view Panel Cut Out Square Flange Receptacle - UTS0 Ø3.
PAGE 74
UTS Series | Connector 14E5/14D5 (Shell size 14, 5x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 74 Square Flange Sealing Cap Receptacle cap Plug cap 85005588A 85005597 Part numbers UTFD14B Part numbers R for Red Receptac
PAGE 75
5 contacts 16A/150V UTS Series | Connector per IEC 61984 14E5/14D5 (Shell size 14, 5x#16) #16 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 18 to 14 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.
PAGE 76
UTS Series | Connector 18X2M3 (Shell size 18, 3x#16, 2x#8) Layout OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 79 PCB contacts supplied separately see page 79 76 Connector type Backshell NPT threaded receptacle Part number Male insert Female insert Without (Fig. 1) UTS718X2M3PNPT UTS718X2M3SNPT Plug Without (Fig. 2) UTS618X2M3P UTS618X2M3S Plug Cable gland (Fig. 3) UTS6JC18X2M3P UTS6JC18X2M3S NPT threaded receptacle Without (Fig.
PAGE 77
5 contacts 32A/300V UTS Series | Connector per IEC 61984 18X2M3 (Shell size 18, 3x#16, 2x#8) Dimensions NPT Threaded Receptacle - UTS7 14.4 31.8 31.8 Ø28.5 Ø19.5 17.2 NPT - 3/4˝ 5 Fig. 1 Plug - UTS6 Ø42.0 Ø39.5 81.3 Ø21.5 37.1 Fig. 2 Fig. 3 Mated Connector Length - UTS6JC 90.5 Panel cut NPT .4 23 PT Drilling Pattern 5.9 ˝ /4 -3 6.
PAGE 78
UTS Series | Connector 18X2M3 (Shell size 18, 3x#16, 2x#8) Accessories and Tooling Jam Nut or NPT Threaded Receptacle Sealing Caps IP68/69K Metal terminal IP68/69K Part number Part number UTS18DCG UTS18DCGR Plug Sealing Cap Crimp Tooling #16 Part number Part number Shandles Toolkit Extraction Tool #16 Contacts IP68/69K Part number Part number UTS618DCG RX2025GE1 Plastic Protective Cap Plug cap 85005590A 85005599 RM/RC 28M1K RM/RC 24M9K RM/RC 20M13K RM/RC 20M12K Standard contacts RM/R
PAGE 79
5 contacts 32A/300V UTS Series | Connector per IEC 61984 18X2M3 (Shell size 18, 3x#16, 2x#8) Contacts #16 Wire size Contact type Crimp Machined Stamped & Formed reeled contacts Max wire Ø Max insulator Ø RC28M1K RC24M9K RC20M13K RC20M12K RC16M23K RC14M30K 0.55 1.00 0.80 1.60 1.15 1.80 1.15 2.20 1.80 3.20 2.30 3.20 SC24M1TK6(1)(2) SC20M1TK6(1)(2) SC16M1TK6(1)(2) SC16M11TK6(1)(2) SC14M1TK6(1)(2) - 0.90-1.60 - 1.20-2.10 - 3.20 - 3.00 2.
PAGE 80
UTS Series | Connector 103W3 (Shell size 10, 3x#20, 3x#16) Layout OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 83 PCB contacts supplied separately see page 83 80 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 1) UTS1JC103W3P UTS1JC103W3S Plug Without (Fig. 2) UTS6103W3P UTS6103W3S Plug Cable gland (Fig. 3) UTS6JC103W3P UTS6JC103W3S Jam nut receptacle Without (Fig.
PAGE 81
6 contacts 5A/32V UTS Series | Connector per IEC 61984 103W3 (Shell size 10, 3x#20, 3x#16) Dimensions Free Hanging - UTS1 Ø15.1 70 Fig. 1 Plug - UTS6 6 25.3 63.2 Ø26.2 Ø26.2 33 Fig. 2 Male Fig. 2 Female Jam Nut Receptacle - UTS7 2.4 Mated Connector Length - UTS7 27.2 Ø15.1 18.3 Fig. 3 77.3 3.5 Fig. 4 22.5 Panel Cut Out Drilling Pattern Hole sizes: #20:0.9mm #16:1.3mm 0.7 16.55 0.8 2.5 Jam Nut Receptacle - UTS7 17.43 3 2.
PAGE 82
UTS Series | Connector 103W3 (Shell size 10, 3x#20, 3x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Part number Part number UTS610DCG UTS10DCGE Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005586A 85005595 Gasket Part numbers UTFD12B Color Coding Rings G for Green Part numbers R for
PAGE 83
6 contacts 5A/32V UTS Series | Connector per IEC 61984 103W3 (Shell size 10, 3x#20, 3x#16) Contacts Wire size Contact type PCB Coaxial Max wire Ø Max insulator Ø 0.55 0.80 1.15 1.15 1.80 2.30 1.00 1.60 1.80 2.20 3.20 3.20 SC24M1TK6(1)(2) SC20M1TK6(1)(2) SC16M1TK6(1)(2) SC16M11TK6(1)(2) SC14M1TK6(1)(2) - 0.90-1.60 1.20-2.10 3.20 3.00 3.
PAGE 84
UTS Series | Connector 106 - 10E6/10D6 (Shell size 10, 6x#20) Layout OR OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Free hanging receptacle Cable gland (Fig. 1) Female insert UTS1JC106S UTS6106S UTS6JC106S UTS7106S Plug Without (Fig. 2) Plug Cable gland (Fig. 3) Jam nut receptacle Without (Fig. 4) UTS1JC106P UTS6106P UTS6JC106P UTS7106P Jam nut receptacle Without (Fig. 4) UTS7106P UTS7106S Square flange receptacle Without (Fig.
PAGE 85
6 contacts 5A/32V UTS Series | Connector per IEC 61984 106 - 10E6/10D6 (Shell size 10, 6x#20) Dimensions Free Hanging - UTS1 Plug - UTS6 33 70 63.2 Ø15.1 Ø26.2 Male Female 25.3 Fig. 1 Fig. 2 M16 Threaded Receptacle - UTS7 Jam Nut Receptacle - UTS7 2.4 18.3 22.5 27.2 3.5 3.5 3.0 24 M16x1.5 4.2 Square Flange Receptacle - UTS0 Fig. 9 8.1 mini 7.5 11.3 13.9 Front view Fig. 7 Fig. 5 21.5 5 Ø15.1 18.3 4.7 mini Ø15.1 Fig. 4 Fig. 6 3.0 Fig. 3 Fig.
PAGE 86
UTS Series | Connector 106 - 10E6/10D6 (Shell size 10, 6x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS610DCG UTS10DCGE Plastic Protective Cap Gasket Contacts RM/RC RM/RC RM/RC SM/SC SM/SC Part num
PAGE 87
6 contacts 7A/32V UTS Series | Connector per IEC 61984 106 - 10E6/10D6 (Shell size 10, 6x#20) Contacts #20 Wire size Contact type Crimp Machined Stamped & Formed reeled contacts PCB Female Max wire Ø Max insulator Ø RM24W3K(1) RC24W3K(1) 0.80 1.60 0.32-0.52 RM20W3K (1) RC20W3K 1.15 1.60 0.50-0.93 RM18W3K(1) RC18W3K(1) 1.30 2.10 0.13-0.25 SM24W3TK6(2) SC24W3TK6(2) - 0.90-1.60 0.13-0.25 SM24W3S26 SC24W3S25(2) - 0.90-1.60 22-20 0.32-0.52 SM20W3TK6 (2) SC20W3TK6 - 1.
PAGE 88
UTS Series | Connector 10E98/10D98 (Shell size 10, 6x#20) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 91 PCB contacts loaded see page 91 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS010E98P UTS010E98S Without (Fig. 1) UTS610E98P UTS610E98S Cable gland (Fig. 2) UTS6JC10E98P UTS6JC10E98S Jam nut receptacle Without (Fig.
PAGE 89
6 contacts 7A/50V UTS Series | Connector per IEC 61984 10E98/10D98 (Shell size 10, 6x#20) Dimensions Plug - UTS6 25.3 Ø26.2 63.2 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3 3 4.2 27.2 Ø15.1 3.5 3.5 3.5 Fig. 3 Fig. 7 Front view Fig. 5 Fig. 4 Square Flange Receptacle - UTS0 11.3 Mated Connector Lengths 24 7.5 8.1 mini 6 22.4 18.3 Ø15.1 18.3 Ø15.1 18.3 4.7 mini 70.9 18.5 Ø15.1 UTS0 UTS7 77.3 Ø3.2 Fig. 6 Front view Panel Cut Out Square Flange Receptacle - UTS0 Ø3.
PAGE 90
UTS Series | Connector 10E98/10D98 (Shell size 10, 6x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Protective Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR UTS610DCG UTS10DCGE Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 90 Square Flange Sealing Cap Receptacle cap Plug cap 85005586A 85005595 Part numbers UTFD12B Part numbers R for Red Rec
PAGE 91
6 contacts 7A/50V UTS Series | Connector per IEC 61984 10E98/10D98 (Shell size 10, 6x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.
PAGE 92
UTS Series | Connector 147 - 14E7/14D7 (Shell size 14, 6 + ground, 7x#16) Layout OR OR OR OR OR WITH Connector Part Numbers Contact type Backshell Square flange receptacle Without (Fig. 2) Free hanging receptacle Cable gland and grommet (Fig. 3) Free hanging receptacle Nut and grommet (Fig. 4) Free hanging receptacle Cable gland (Fig.
PAGE 93
6 + ground 16A/300V UTS Series | Connector per IEC 61984 147 - 14E7/14D7 (Shell size 14, 6 + ground, 7x#16) Dimensions Square Flange Receptacle - UTS0 29.1 Fig. 3 78.5 28.8 23.2 Ø22.3 Fig. 1 Ø22.3 11.3 Free Hanging - UTS1 2.3 22 Ø3.2 Front view Fig. 2 43 Fig. 4 Plug - UTS6 33 71.5 32 Fig. 6 Fig. 7 6+ Ø35.1 Male Female 25.3 Fig. 5 Jam Nut Receptacle - UTS7 Fig. 8 Fig. 9 49 1.6 75 18 UTS0 Ø22.3 Ø31.8 18 UTS7 4.2 3.5 Mated Connector Lengths 3.5 3 82 70.7 Fig. 10 Fig.
PAGE 94
UTS Series | Connector 147 - 14E7/14D7 (Shell size 14, 6 + ground, 7x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS614DCG UTS14DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug c
PAGE 95
6 + ground 16A/300V UTS Series | Connector per IEC 61984 147 - 14E7/14D7 (Shell size 14, 6 + ground, 7x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece PCB Coaxial Max insulator Ø 0.55 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 96
UTS Series | Connector 10E7/10D7 (Shell size 10, 7x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 99 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 1) UTS010E7P UTS010E7S Without (Fig. 2) UTS610E7P UTS610E7S Cable gland (Fig. 3) UTS6JC10E7P UTS6JC10E7S Jam nut receptacle Without (Fig. 4) UTS710E7P UTS710E7S M16 threaded receptacle Without (Fig.
PAGE 97
7 contacts 7A/50V UTS Series | Connector per IEC 61984 10E7/10D7 (Shell size 10, 7x#20) Dimensions Square Flange Receptacle - UTS0 7.5 25.3 2.3 Ø3.2 Fig. 1 Fig. 2 Front view Jam Nut Receptacle - UTS7 3 63.2 Ø26.2 18.5 Ø15.1 11.3 Plug - UTS6 24 Fig. 3 Mated Connector Lengths 22.4 18.3 70.9 7 27.2 Ø15.1 UTS0 UTS7 77.3 3.5 Front view Fig. 4 M16 Threaded Receptacle - UTS7 24 Ø15.1 21.5 5 13.9 M16x1.5 Fig. 5 Panel Cut Out Drilling Pattern Jam nut receptacle UTS7 M16 Chf.
PAGE 98
UTS Series | Connector 10E7/10D7 (Shell size 10, 7x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS10DCG UTS10DCGR UTS610DCG UTS10DCGE Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers 98 Square Flange Sealing Cap Receptacle cap Plug cap 85005586A 85005595 Part numbers UTFD12B Part numbers R for Red Receptac
PAGE 99
7 contacts 7A/50V UTS Series | Connector per IEC 61984 10E7/10D7 (Shell size 10, 7x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Contacts Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 3.8 mm 7 Electrical Characteristics UTS 10E7/10D7 Derating Curves Current (A) UL 6A 250V UL94 HB CSA 6A 250V UL94 HB IEC 7A 50V 1.5kV 3 Test conditions Contact used: Machined contacts Wires used: 0.
PAGE 100
UTS Series | Connector 128 (Shell size 12, 8x#16) Layout OR OR OR OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Female insert Without (Fig. 1) UTS0128P UTS0128S Cable gland and grommet (Fig. 2) UTS1GJC128P - Nut and grommet (Fig. 3) UTS1GN128P - Panel gasket and nut (Fig. 8) Panel gasket (Fig. 9) UTS7128PM20NUT UTS7128PM20 UTS7128SM20NUT UTS7128SM20 Cable gland (Fig. 2) UTS1JC128P UTS1JC128S Plug Without (Fig.
PAGE 101
8 contacts 10A/80V UTS Series | Connector per IEC 61984 128 (Shell size 12, 8x#16) Dimensions Square Flange Receptacle - UTS0 Fig. 2 26.4 20.8 Ø19.1 18.1 2.3 10.5 Ø3.2 Fig. 1 74.5 Ø19.1 11.3 Free Hanging - UTS1 40.9 Front view Fig. 3 Jam Nut & M20 Threaded Receptacle - UTS7 1.6 18 49.1 Panel gasket Fig. 8 Fig. 6 25.4 Ø19.1 27 Ø31.9 Fig. 4 6.1 Ø19.1 18 Fig. 5 8 4.2 3.5 3.5 3 19.5 74.5 Fig.7 Fig. 9 Plug - UTS6 Mated Connector Lengths Fig. 11 66.7 33 M20X1.5 32 77.
PAGE 102
UTS Series | Connector 128 (Shell size 12, 8x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS612DCG UTS12DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005587A 85005596
PAGE 103
8 contacts 10A/80V UTS Series | Connector per IEC 61984 128 (Shell size 12, 8x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece PCB Max insulator Ø 0.55 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 104
UTS Series | Connector 12E8/12D8 (Shell size 12, 8x#20) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 107 PCB contacts loaded see page 107 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS012E8P UTS012E8S Without (Fig. 1) UTS612E8P UTS612E8S Cable gland (Fig. 2) UTS6JC12E8P UTS6JC12E8S Jam nut receptacle Without (Fig.
PAGE 105
8 contacts 6A/32V UTS Series | Connector per IEC 61984 12E8/12D8 (Shell size 12, 8x#20) Dimensions Plug - UTS6 66.7 Ø30.1 25.3 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3.1 3 4.2 3.5 Fig. 4 Fig. 7 7.5 8.1 mini 8 3.5 Front view Fig. 5 Square Flange Receptacle - UTS0 11.3 27.2 31.9 3.5 Fig. 3 4.7 mini 18 Ø19 Ø19 18 Ø19 18 Mated Connector Lengths 26.4 77.6 Ø19 20.8 UTS0 UTS7 81.7 2.3 Ø3.2 Front view Panel Cut Out Square Flange Receptacle - UTS0 Ø3.
PAGE 106
UTS Series | Connector 12E8/12D8 (Shell size 12, 8x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR UTS612DCG UTS12DCGE Plastic Protective Cap Gasket Color Coding Rings G for Green Y for Yellow Part numbers Receptacle cap Plug cap 85005587A 85005596 106 Square Flange Sealing Cap Part numbers UTFD13B Part numbers R for Red Receptac
PAGE 107
8 contacts 6A/32V UTS Series | Connector per IEC 61984 12E8/12D8 (Shell size 12, 8x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 8 Electrical Characteristics UTS 12E8/12D8 Derating Curves Current (A) UL 4.5A 250V UL94 HB CSA 4.
PAGE 108
UTS Series | Connector 148 (Shell size 14, 4x#16, 4x#12) Layout OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 111 108 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 1) UTS1JC148P UTS1JC148S Plug Without (Fig. 2) UTS6148P UTS6148S Plug Cable gland (Fig. 3) UTS6JC148P UTS6JC148S Jam nut receptacle Without (Fig.
PAGE 109
8 contacts 17A/230V UTS Series | Connector per IEC 61984 148 (Shell size 14, 4x#16, 4x#12) Dimensions Free Hanging - UTS1 Ø22.3 78.5 Fig. 1 Plug - UTS6 71.5 25.3 Ø35.1 Ø35.1 33 8 Fig. 2 Male Fig. 2 Female Jam Nut Receptacle - UTS7 2.4 Mated Connector Length - UTS7 35.1 Ø22.3 18 Fig. 3 3.5 82 30.4 Fig. 4 Panel Cut Out Drilling Pattern 5.5 Hole sizes: #20:0.9mm #16:1.3mm 5.1 2.6 2.6 3.1 4.4 0.2 0.8 3.5 5.6 4.5 25.55 0.3 24.15 0.4 4.
PAGE 110
UTS Series | Connector 148 (Shell size 14, 4x#16, 4x#12) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Crimp Tooling #16 Metal terminal IP68/69K Part number Part number UTS14DCG UTS14DCGR Plug Sealing Cap IP68/69K Part number UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Part numbers 85005588A 85005597 Part numbers UTFD14B Color Coding Rings HEAD (without Shandles) Contacts Part number of head Contact size RM/RC 28M1K RM/RC 24M9K RM/RC 20M13K RM/RC 20M12K Standard contac
PAGE 111
8 contacts 17A/230V UTS Series | Connector per IEC 61984 148 (Shell size 14, 4x#16, 4x#12) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece Male Female Max wire Ø Max insulator Ø 30-28 RM28M1K(1) RC28M1K(1) 0.55 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 112
UTS Series | Connector 1210 - 12E10/12D10 (Shell size 12, 10x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 115 Handsolder electrical contacts loaded see page 115 PCB contacts loaded see page 115 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 1) UTS1JC1210P UTS1JC1210S Plug Without (Fig. 2) Plug Cable gland (Fig.
PAGE 113
10 contacts 6A/50V UTS Series | Connector per IEC 61984 1210 - 12E10/12D10 (Shell size 12, 10x#20) Dimensions Free Hanging - UTS1 Plug - UTS6 74 33 66.7 Ø30.1 Ø19.1 Male Female 25.3 Fig. 1 Fig. 2 Fig. 3 Jam Nut Receptacle - UTS7 3 18 3.5 Fig. 5 3.5 Fig. 6 Mated Connector Lengths 26.4 7.5 8.1 mini 10 Front view Fig. 7 Square Flange Receptacle - UTS0 11.3 27.2 31.9 Ø19.1 3.5 4.7 mini 3 4.2 18 Ø19.1 18 3.1 12.3 Ø19.1 Fig. 4 77.6 20.8 Ø19.1 UTS0 UTS7 81.7 2.3 Ø3.
PAGE 114
UTS Series | Connector 1210 - 12E10/12D10 (Shell size 12, 10x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS612DCG UTS12DCGE Plastic Protective Cap Gasket Contacts RM/RC RM/RC RM/RC SM/SC SM/SC Part
PAGE 115
10 contacts 6A/50V UTS Series | Connector per IEC 61984 1210 - 12E10/12D10 (Shell size 12, 10x#20) Contacts #20 Wire size Contact type Crimp Machined Stamped & Formed reeled contacts PCB Female Max wire Ø Max insulator Ø RM24W3K(1) RC24W3K(1) 0.80 1.60 0.32-0.52 RM20W3K (1) RC20W3K 1.15 1.60 0.50-0.93 RM18W3K(1) RC18W3K(1) 1.30 2.10 0.13-0.25 SM24W3TK6(2) SC24W3TK6(2) - 0.90-1.60 0.13-0.25 SM24W3S26 SC24W3S25(2) - 0.90-1.60 22-20 0.32-0.
PAGE 116
UTS Series | Connector 1412 (Shell size 14, 12x#16) Layout OR OR OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 119 PCB contacts supplied separately see page 119 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 1) UTS01412P UTS01412S Free hanging receptacle Cable gland and grommet (Fig. 2) UTS1GJC1412P - Free hanging receptacle Nut and grommet (Fig.
PAGE 117
12 contacts 10A/63V UTS Series | Connector per IEC 61984 1412 (Shell size 14, 12x#16) Dimensions Square Flange Receptacle - UTS0 11.3 21.9 Free Hanging - UTS1 Fig. 2 28.8 78.5 Ø22.3 23.2 Ø22.3 Male Female 2.3 10.5 Ø3.2 Fig. 1 43 Front view Fig. 3 Plug - UTS6 33 71.5 32 Fig. 5 Fig. 6 Ø35.1 Male Female 25.3 Fig. 4 Jam Nut Receptacle - UTS7 49 1.6 UTS0 18 12 75 Ø22.3 Fig. 7 UTS7 82 70.7 Fig. 9 Panel Cut Out Drilling Pattern Jam Nut Receptacle - UTS7 5.1 2 1.
PAGE 118
UTS Series | Connector 1412 (Shell size 14, 12x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS614DCG UTS14DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005588A 8500559
PAGE 119
12 contacts 10A/63V UTS Series | Connector per IEC 61984 1412 (Shell size 14, 12x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.20 PCB Coaxial (1) (1) (1) (1) (1) 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) - 0.90-1.
PAGE 120
UTS Series | Connector 14E12/14D12 (Shell size 14, 8x#20, 4x#16) Layout OR OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 123 PCB contacts loaded see page 123 Connector type Backshell Square flange receptacle Without (Fig. 6) Part number Male insert Female insert UTS014E12P UTS014E12S Without (Fig. 1) UTS614E12P UTS614E12S Cable gland (Fig. 2) UTS6JC14E12P UTS6JC14E12S Jam nut receptacle Without (Fig.
PAGE 121
12 contacts 4A/50V UTS Series | Connector per IEC 61984 14E12/14D12 (Shell size 14, 8x#20, 4x#16) Dimensions Plug - UTS6 71.5 Ø35.1 25.3 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3 3 4.2 3.5 35.1 3.5 Fig. 3 3.5 Fig. 4 Front view Fig. 5 Square Flange Receptacle - UTS0 Mated Connector Lengths 28.8 7.5 8.1 mini 12 75 23.2 Ø22.3 11.3 30.4 4.8 mini 18 Ø22.3 Ø22.3 18 Ø22.3 18 UTS0 UTS7 2.3 82 Ø3.2 Front view Panel Cut Out Drilling Pattern Jam Nut Receptacle - UTS7 22° Ø3.
PAGE 122
UTS Series | Connector 14E12/14D12 (Shell size 14, 8x#20, 4x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Color Coding Rings Part numbers G for Green Y for Yellow Part numbers Receptacle cap Plug cap 85005588A 85005597 122 Square Flange Sealing Cap Part numbers UTFD14B R for Red
PAGE 123
12 contacts 4A/50V UTS Series | Connector per IEC 61984 14E12/14D12 (Shell size 14, 8x#20, 4x#16) #16 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 18 to 14 5.0 mm PCB Machined (1) Min 0.4µ gold over 0.8µ Ni - - #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 3.8 mm PCB Contacts Machined (1) Min 0.
PAGE 124
UTS Series | Connector 1492 (Shell size 14, 12x#16) Layout OR OR OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 127 PCB contacts supplied separately see page 127 Connector type Backshell Square flange receptacle Female insert Without (Fig. 1) UTS01492P UTS01492S Free hanging receptacle Cable gland and grommet (Fig. 2) UTS1GJC1492P - Free hanging receptacle Nut and grommet (Fig. 3) UTS1GN1492P - Free hanging receptacle Cable gland (Fig.
PAGE 125
12 contacts 10A/63V UTS Series | Connector per IEC 61984 1492 (Shell size 14, 12x#16) Dimensions Square Flange Receptacle - UTS0 11.3 21.9 Free Hanging - UTS1 Fig. 2 28.8 78.5 Ø22.3 23.2 Ø22.3 Male Female 2.3 10.5 Ø3.2 Fig. 1 43 Front view Fig. 3 Plug - UTS6 33 71.5 32 Fig. 5 Fig. 6 Ø35.1 Male Female 25.3 Fig. 4 Jam Nut Receptacle - UTS7 18 UTS0 18 12 75 Ø22.3 Ø35.1 Fig. 8 49 1.6 Mated Connector Lengths Fig. 7 UTS7 82 70.7 Fig.
PAGE 126
UTS Series | Connector 1492 (Shell size 14, 12x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS614DCG UTS14DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005588A 8500559
PAGE 127
12 contacts 10A/63V UTS Series | Connector per IEC 61984 1492 (Shell size 14, 12x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.20 PCB Coaxial (1) (1) (1) (1) (1) 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) - 0.90-1.
PAGE 128
UTS Series | Connector 12E14/12D14 (Shell size 12, 14x#20) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 131 PCB contacts loaded see page 131 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS012E14P UTS012E14S Without (Fig. 1) UTS612E14P UTS612E14S Cable gland (Fig. 2) UTS6JC12E14P UTS6JC12E14S Jam nut receptacle Without (Fig.
PAGE 129
14 contacts 5A/32V UTS Series | Connector per IEC 61984 12E14/12D14 (Shell size 12, 14x#20) Dimensions Plug - UTS6 66.7 Ø30.1 25.3 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3.1 3.5 31.9 3.5 Fig. 4 Fig. 7 7.5 7.1 mini Front view Fig. 5 Square Flange Receptacle - UTS0 11.3 27.2 18 3.5 Fig. 3 3.8 mini Ø19 Ø19 18 Ø19 18 3 4.2 Mated Connector Lengths 26.4 77.6 UTS0 Ø19 20.8 14 UTS7 81.7 2.3 Ø3.2 Fig. 6 Front view Drilling Pattern Jam Nut Receptacle - UTS7 22° Ø3.1 Ø3.
PAGE 130
UTS Series | Connector 12E14/12D14 (Shell size 12, 14x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS12DCG UTS12DCGR UTS612DCG UTS12DCGE Plastic Protective Cap Gasket Color Coding Rings Part numbers G for Green Y for Yellow Part numbers Receptacle cap Plug cap 85005587A 85005596 130 Square Flange Sealing Cap Part numbers UTFD13B R for Red Recep
PAGE 131
14 contacts 5A/32V UTS Series | Connector per IEC 61984 12E14/12D14 (Shell size 12, 14x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 14 Electrical Characteristics UTS 12E14/12D14 Derating Curves Current (A) UL 4.5A 250V UL94 HB CSA 4.5A 250V UL94 HB IEC 5A 32V 1.
PAGE 132
UTS Series | Connector 14E15/14D15 (Shell size 14, 14x#20, 1x#16) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 135 PCB contacts loaded see page 135 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS014E15P UTS014E15S Without (Fig. 1) UTS614E15P UTS614E15S Cable gland (Fig. 2) UTS6JC14E15P UTS6JC14E15S Jam nut receptacle Without (Fig.
PAGE 133
15 contacts 4A/50V UTS Series | Connector per IEC 61984 14E15/14D15 (Shell size 14, 14x#20, 1x#16) Dimensions Plug - UTS6 25.3 Ø35.1 71.5 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3 3.5 35.1 3.5 Fig. 4 Fig. 7 7.5 8.1 mini Front view Fig. 5 Square Flange Receptacle - UTS0 11.3 30.4 18 3.5 Fig. 3 4.8 mini Ø22.3 Ø22.3 18 Ø22.3 18 3 4.2 Mated Connector Lengths 28.8 75 23.2 Ø22.3 UTS0 15 UTS7 82 2.3 Ø3.2 Front view Fig.
PAGE 134
UTS Series | Connector 14E15/14D15 (Shell size 14, 14x#20, 1x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Color Coding Rings Part numbers G for Green Y for Yellow Part numbers Receptacle cap Plug cap 85005588A 85005597 134 Square Flange Sealing Cap Part numbers UTFD14B R for Red
PAGE 135
15 contacts 4A/50V UTS Series | Connector per IEC 61984 14E15/14D15 (Shell size 14, 14x#20, 1x#16) #16 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 18 to 14 5.0 mm PCB Machined (1) Min 0.4µ gold over 0.8µ Ni - - #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 3.8 mm PCB Contacts Machined (1) Min 0.
PAGE 136
UTS Series | Connector 14E18/14D18 (Shell size 14, 18x#20) Layout OR OR WITH Connector Part Numbers Contact type Handsolder electrical contacts loaded see page 139 PCB contacts loaded see page 139 Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig. 6) UTS014E18P UTS014E18S Without (Fig. 1) UTS614E18P UTS614E18S Cable gland (Fig. 2) UTS6JC14E18P UTS6JC14E18S Jam nut receptacle Without (Fig.
PAGE 137
18 contacts 5A/50V UTS Series | Connector per IEC 61984 14E18/14D18 (Shell size 14, 18x#20) Dimensions Plug - UTS6 71.5 Ø35.1 25.3 Fig. 1 Fig. 2 Jam Nut Receptacle - UTS7 3 3 3 4.2 3.5 35.1 3.5 Fig. 3 3.5 Fig. 4 Fig. 7 7.5 8.1 mini Front view Fig. 5 Square Flange Receptacle - UTS0 11.3 30.4 4.8 mini 18 Ø22.3 Ø22.3 18 Ø22.3 18 Mated Connector Lengths 28.8 75 23.2 Ø22.3 UTS0 UTS7 82 2.3 Ø3.2 Fig.
PAGE 138
UTS Series | Connector 14E18/14D18 (Shell size 14, 18x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K IP68/69K Plug Sealing Cap Metal terminal IP68/69K Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Color Coding Rings Part numbers G for Green Y for Yellow Part numbers Receptacle cap Plug cap 85005588A 85005597 138 Square Flange Sealing Cap Part numbers UTFD14B R for Red Recep
PAGE 139
18 contacts 5A/50V UTS Series | Connector per IEC 61984 14E18/14D18 (Shell size 14, 18x#20) #20 Contact type Plating Cable acceptance (AWG) Wire stripping length Handsolder Loaded in the connector Min 0.4µ gold over 0.8µ Ni 22 to 18 5 mm PCB Contacts Machined (1) Min 0.4µ gold over 0.8µ Ni - - (1): For dimensions see page 169 18 Electrical Characteristics UTS 14E18/14D18 Derating Curves Current (A) 10 UL 4A 250V UL94 HB CSA 4A 250V UL94 HB IEC 5A 50V 1.
PAGE 140
UTS Series | Connector 1419 - 14E19/14D19 (Shell size 14, 19x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 143 PCB contacts supplied separately see page 143 Handsolder electrical contacts loaded see page 143 PCB contacts loaded see page 143 Connector type Backshell Free hanging receptacle Cable gland (Fig. 1) Part number Male insert Female insert UTS1JC1419S UTS61419S UTS6JC1419S UTS71419S Plug Without (Fig.
PAGE 141
19 contacts 5A/32V UTS Series | Connector per IEC 61984 1419 - 14E19/14D19 (Shell size 14, 19x#20) Dimensions Free Hanging - UTS1 Plug - UTS6 71.5 33 78.5 Ø22.3 Ø35.1 Male Female 25.3 Fig. 1 Fig. 3 Fig. 2 Jam Nut Receptacle - UTS7 3 12.3 4.2 3.5 3.5 3 Fig. 5 3.5 Fig. 6 Front view Fig. 7 Square Flange Receptacle - UTS0 Fig. 9 11.3 7.5 8.1 mini 30.4 18 Ø22.3 Ø22.3 18 Ø22.3 18 4.8 mini 3 35.1 Fig. 4 Mated Connector Lengths 28.8 75 23.2 Ø22.3 UTS0 UTS7 2.3 82 Ø3.
PAGE 142
UTS Series | Connector 1419 - 14E19/14D19 (Shell size 14, 19x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS14DCG UTS14DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS614DCG UTS14DCGE Plastic Protective Cap Gasket Contacts RM/RC RM/RC RM/RC SM/SC SM/SC Part
PAGE 143
19 contacts 5A/32V UTS Series | Connector per IEC 61984 1419 - 14E19/14D19 (Shell size 14, 19x#20) Contacts Max wire Ø Max insulator Ø Wire stripping length RM24W3K(1) RC24W3K(1) 0.80 1.60 4.80 0.32-0.52 RM20W3K (1) RC20W3K 1.15 1.60 4.80 0.50-0.93 RM18W3K(1) RC18W3K(1) 1.30 2.10 4.80 0.13-0.25 SM24W3TK6(2) SC24W3TK6(2) - 0.90-1.60 4.00 26-24 0.13-0.25 SM24W3S26 (2) SC24W3S25 - 0.90-1.60 4.00 22-20 0.32-0.52 SM20W3TK6(2) SC20W3TK6(2) - 1.20-2.10 4.00 22-20 0.
PAGE 144
UTS Series | Connector 1823 (Shell size 18, 23x#16) Layout OR OR OR WITH Connector Part Numbers Contact type Crimp contacts supplied separately see page 147 PCB contacts supplied separately see page 147 Connector type Backshell Square flange receptacle Free hanging receptacle Part number Male insert Female insert Without (Fig. 1) UTS01823P UTS01823S Cable gland (Fig. 2) UTS1JC1823P UTS1JC1823S Plug Without (Fig. 3) UTS61823P UTS61823S Plug Cable gland (Fig.
PAGE 145
23 contacts 9A/63V UTS Series | Connector per IEC 61984 1823 (Shell size 18, 23x#16) Dimensions Square Flange Receptacle - UTS0 11.3 18.9 Free Hanging - UTS1 33.5 89 Ø28.6 27.1 Ø28.6 Male Female 2.5 10.3 Ø3.2 Fig. 2 Fig. 1 Front view Plug - UTS6 33 81.3 Ø42 Male Female 25.3 Fig. 3 Fig. 4 Jam Nut Receptacle - UTS7 Mated Connector Lengths 36.9 18 84.1 12.3 41.5 Ø28.6 UTS0 UTS7 3.5 90.8 Front view Fig.
PAGE 146
UTS Series | Connector 1823 (Shell size 18, 23x#16) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS18DCG UTS18DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS618DCG UTS18DCGE Contacts Plastic Protective Cap Part numbers Receptacle cap Plug cap 85005590A 8500559
PAGE 147
23 contacts 9A/63V UTS Series | Connector per IEC 61984 1823 (Shell size 18, 23x#16) Contacts #16 Contact type AWG Crimp Machined Stamped & Formed reeled contacts See note (2) for loose piece 1.00 26-24 RM24M9K RC24M9K 0.80 1.60 22-20 RM20M13K(1) RC20M13K(1) 1.15 1.80 22-20 RM20M12K (1) RC20M12K 1.15 2.20 20-16 RM16M23K(1) RC16M23K(1) 1.80 3.20 16-14 RM14M30K RC14M30K 2.30 3.
PAGE 148
UTS Series | Connector 1832 - 18E32 (Shell size 18, 32x#20) Layout OR OR OR WITH Connector Part Numbers Contact type Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig. 2) UTS1JC1832P UTS1JC1832S Plug Without (Fig. 3) UTS61832P UTS61832S Plug Cable gland (Fig. 4) UTS6JC1832P UTS6JC1832S Jam nut receptacle Without (Fig. 5) UTS71832P UTS71832S PCB contacts supplied separately see page 151 Jam nut receptacle Without (Fig.
PAGE 149
32 contacts 4A/32V UTS Series | Connector per IEC 61984 1832 - 18E32 (Shell size 18, 32x#20) Dimensions Square Flange Receptacle - UTS0 Free Hanging - UTS1 33.5 89 27.1 Ø28.6 18.9 2.5 Ø3.2 Fig. 1 Ø28.6 11.3 Fig. 2 Front view Plug - UTS6 33 81.3 Ø42 Male Female 25.3 Fig. 3 Fig. 4 Jam Nut Receptacle - UTS7 12.3 90.8 41.5 Ø28.6 18 Mated Connector Length - UTS7 36.9 3.5 Front view Drilling Pattern 8.7 7.2 5.3 3.1 5.7 32 3.3 1.6 8.1 8.9 2.4 5.5 4 0.8 2.4 5.8 3.8 4.9 5.
PAGE 150
UTS Series | Connector 1832 - 18E32 (Shell size 18, 32x#20) Accessories and Tooling Jam Nut Sealing Caps IP68/69K Handle (without Head) Tool Kit Metal terminal IP68/69K Part number Part number Part number Part number UTS18DCG UTS18DCGR Shandles Toolkit Plug Sealing Cap IP68/69K Square Flange Sealing Cap Crimp Tooling (without Shandles) Metal terminal IP68/69K Part number Part number UTS618DCG UTS18DCGE Plastic Protective Cap Gasket Contacts RM/RC RM/RC RM/RC SM/SC SM/SC Part numbe
PAGE 151
32 contacts 4A/32V UTS Series | Connector per IEC 61984 1832 - 18E32 (Shell size 18, 32x#20) Contacts Max wire Ø Max insulator Ø Wire stripping length RM24W3K(1) RC24W3K(1) 0.80 1.60 4.80 0.32-0.52 RM20W3K (1) RC20W3K 1.15 1.60 4.80 0.50-0.93 RM18W3K(1) RC18W3K(1) 1.30 2.10 4.80 0.13-0.25 SM24W3TK6(2) SC24W3TK6(2) - 0.90-1.60 4.00 26-24 0.13-0.25 SM24W3S26 (2) SC24W3S25 - 0.90-1.60 4.00 22-20 0.32-0.52 SM20W3TK6(2) SC20W3TK6(2) - 1.20-2.10 4.00 22-20 0.32-0.
PAGE 152
UTS Series | Connector LC Layout OR OR WITH Connector Part Numbers 152 Connector type Backshell Free hanging receptacle Cable gland Plug Jam nut receptacle Part number Male insert Female insert UTS1JC18LCN - Cable gland - UTS6JC18LCN Without UTS718LCN -
PAGE 153
UTS Series | Connector LC Dimensions Free Hanging Receptacle -UTS1JC18LCN 4.803" max 1.653" maxi Ø 0.236" max Ø 0.118" min Plug - UTS6JC18LCN 4.409" max 1.653" maxi Ø 0.236" max Ø 0.118" min Mated Connector Length - UTS7 Jam Nut Receptacle - UTS718LCN 4.566" 0.688" max Ø 1.791" max 0.196" max Panel Cut Out Jam Nut Receptacle - UTS7 1.195" 0.728" max LC 1.
PAGE 154
UTS Series | Connector LC Accessories Sealing Caps For UTS1JC18LCN & UTS718LCN For UTS6JC18LCN 154 Part number Part number UTS618DCG2 UTS18DCG2
PAGE 155
UTS Series | Connector LC 155
PAGE 156
UTS Series | Connector MPO Layout OR OR WITH Connector Part Numbers Connector type 156 Backshell Part number Male insert Female insert Free hanging receptacle Cable gland UTS1JC18MPN - Plug Cable gland - UTS6JC18MPN Jam nut receptacle Without UTS718MPN -
PAGE 157
UTS Series | Connector MPO Dimensions Free Hanging Receptacle -UTS1JC18MPN 4.803" max 1.653" maxi Ø 0.236" max Ø 0.118" min Plug - UTS6JC18MPN 4.409" max 1.653" maxi Ø 0.236" max Ø 0.118" min Mated Connector Length - UTS7 Jam Nut Receptacle - UTS718MPN 4.566" 0.688" max Ø 1.791" max 0.196" max Panel Cut Out Jam Nut Receptacle - UTS7 1.195" 0.728" max 1.
PAGE 158
UTS Series | Connector MPO Accessories Sealing Caps For UTS1JC18MPN & UTS718MPN For UTS6JC18MPN 158 Part number Part number UTS618DCG2 UTS18DCG2
PAGE 159
UTS Series | Connector MPO 159
PAGE 161
UTS Series Contacts Description ................................................................................................................ 162 Contact Plating Selector Guide ................................................................................. 163 Contact Selector Guide ............................................................................................. 164 Packaging ............................................................................................................
PAGE 162
UTS Series | Contacts Contacts Description The UTS series is delivered with (solder and PCB versions) or without contact (crimp version) and offers the unique feature to use the same contact style in any layout with the same active part size (i.e. #20, #16, #12, etc.). This provides our customers with an easy solution to buy only one type of contact to equip all their connectors even if housings/shell sizes are different. This provides the benefit of standardisation and subsequent reduced inventory costs.
PAGE 163
UTS Series | Contacts Contact Plating Selector Guide Once the contact size has been selected, the next step is to decide on which type to use. Souriau offers two main types of electrical contacts: • Machined • Stamped & Formed Machined contacts are generally chosen as a better solution for power applications or when lower quantities are needed. Stamped & Formed contacts offer the ability to be crimped automatically which makes them more suitable for high volume production applications.
PAGE 164
UTS Series | Contacts Contact Selector Guide Contacts supplied separately Electrical characteristics: contact resistance #20 Ø1.0mm #16 Ø1.6mm Machined Available platings (contacts supplied separately) < 6mΩ A 2μm Nickel + 2μm Ag J Gold flash over Nickel 2μm mini K 0.4 μm Gold over 2 μm Nickel mini Stamped & Formed < 6mΩ Machined < 3mΩ Stamped & Formed < 6mΩ Machined < 5mΩ S18 Machined < 5mΩ S25 S26 Active part: Gold flash over Nickel Crimp area: 1.3μm Tin mini over Nickel Other: 1.
PAGE 165
UTS Series | Contacts Crimp Contacts Standard Version Wire size Type Machined #20 Ø1 mm #16 Ø1.6 mm #8 Ø3.6 mm AWG mm² Male 26-24 0.13-0.20 RM24W3K 26-24 0.13-0.25 Machined 22-20 0.32-0.52 Female Max wire Ø Max insulator Ø Available plating see page 156 RC24W3K - 1.58 max K 0.89-1.58 TK6 S25 (female) S26 (male) 1.58 max K 1.17-2.08 TK6 S25 (female) S26 (male) 2.
PAGE 166
UTS Series | Contacts Crimp Contacts (Continued) First Mate Last Break Contacts Contact size Type #16 Ø1.6 mm Machined Longer male contact (+1mm) #16 Ø1.6 mm Shorter female contact (-0.7mm) Machined Wire size Part number AWG mm² Male 30-28 0.05-0.08 26-24 0.13-0.2 RM28M1GE1K RM24M9GE1K RM20M13GE1K RM20M12GE1K RM16M23GE1K RM14M30GE1K - - RC28M1GE7K RC24M9GE7K RC20M13GE7K RC20M12GE7K RC16M23GE7K RC14M30GE7K 22-20 0.32-0.52 20-16 0.52-1.5 16-14 1.5-2.5 30-28 0.05-0.08 26-24 0.13-0.
PAGE 167
UTS Series | Contacts #16 Coaxial Contacts Coaxial Contact Range souriau provides 2 types of coaxial contacts suitable for 50 or 75Ω, coaxial cable or twisted pair cable. Monocrimp coaxial contact • The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. • This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire.
PAGE 168
UTS Series | Contacts PCB Contacts PCB Contacts Supplied Separately - UTS Standard Series PCB soldering The UTS Series can be used in a wave soldering process, but not reflow soldering process. All high temperature processes are prohibited. Part number Contact size Plating see page 164 Male Female #20 Ø1mm RMW50A7K RMW5016K #16 Ø1.6mm RM20M12E8K RM20M12E83K RM20M12E84K RCW50A7K RCW5016K RC20M12E8K RC20M12E83K RC20M12E84K RC20M12E85K RC20M12E86K RC20M12E87K #8 Ø3.
PAGE 169
UTS Series | Contacts PCB Contacts Loaded - UTS Sealed Unmated Series PCB soldering The UTS Series can be used in a wave soldering process, but not reflow soldering process. All high temperature processes are prohibited. UTS0 G UTS7 G Nominal length G (mm) Dimension of dipsolder contacts out of connector (contacts to be ordered separately). UTS0 8 10 12 14 Connector Part Number Pin contact Socket contact G mini G maxi G mini G maxi 8D2 - 8D3 8D4 7.2 9.2 7 9 8D3A/8D98 8D33 8.1 10.
PAGE 170
UTS Series | Contacts Fiber Optic Contacts Description Size 16 fiber optic contacts for UTS and other TRIM TRIO® connectors Size 16 fiber optic contacts are designed for the integration of optical links in UTS and other TRIM TRIO® cable connectors. The Fiber optic contacts are designed to accommodate: • Plastic Optical Fiber (POF) 1 mm core and 2.2 mm jacket Typical features and benefits are: • Socket contact is spring loaded to avoid any air gap between the two optical faces.
PAGE 171
UTS Series | Contacts Ordering Information POF Contacts (Plastic Optical Fiber) Male contact......................................... RMPOF1000 Female contact................................... RCPOF1000B POF Contact (Plastic Optical Fiber) Part numbers Descriptions SPECIFIC TOOLING LIST - Can only be ordered separately Part numbers Descriptions 80WD0005 Stripping tool 80WG0010 Needle 80WD0025 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.
PAGE 173
UTS Series Technical Information Tooling ..................................................................................................................... 174 Crimping Instructions .............................................................................................. 176 Handle & Interchangeable Heads ........................................................................... 178 Extraction Tools .............................................................................................
PAGE 174
UTS Series | Technical Information Automatic Crimping Tools Mecal is a leader in manufacturing tooling for crimping terminals over a stripped wire. Established in 1976, Mecal has become one of the world's leading companies dedicated to the design and manufacture of semi automatic production tools for strip fed, open barrel crimp terminals, serving the Automotive, Telecom and Datacom industries. The extreme environment interconnect specialist “from deep sea to deep space”.
PAGE 175
UTS Series | Technical Information Tooling Crimp Tool Table Standard contacts Contact size #16 Ø 1.6mm (1) loose contact Head* S20RCM RX20D44 S20SCM20 S16RCM20 SHANDLES S16RCM16 S16RCM14 RX2025GE1 S16SCM20 S16SCML1 S16SCML11 Part number Hand tool 82911457N* / 82911456* 82911459N* / 82911458* 82911461N* / 82911460* 82911463N* / 82911462* M317 82911465N* / 82911464* 82911467N* / 82911466* 82913601A / 82913600A #8 Ø 3.
PAGE 176
UTS Series | Technical Information Crimping instructions Wire Stripping Crimp Version Part number Male Female Machined contact Stripping length L #20 (Ø 1mm) RM24W3- / RM20W3RM18W3- RC24W3- / RC20W3RC18W3- 4.8 #16 (Ø 1.6mm) L RM28M1- / RM24M9RM20M13- / RM20M12- RC28M1- / RC24M9RC20M13- / RC20M12- 4.8 RM16M23- /RM14M30- RC16M23- /RC14M30- 7.1 #8 (Ø 3.6mm) 82913601- / 8291360382913605- / 8291360782913609Stamped & Formed 82913600- / 8291360282913604- / 8291360682913608- 6.5 to 7.5 #16 (Ø 1.
PAGE 177
UTS Series | Technical Information Crimping One of the key factors which affects the performance of a connector is the way contacts are terminated. Crimped connections are nowadays seen as the best solution to ensure quality throughout the lifetime of the product. Here are some reasons why we recommend this method of termination for UTS connectors: To ensure that the crimp tooling is performing according to original specifications, it is important to carry out regular checks.
PAGE 178
UTS Series | Technical Information Handle & Interchangeable Heads User Guide 1) Fully close then release the tool, keep it open. Open the 2 pins. 2) Choose the adapter head (sold separately), keep vertical and slide it into the handle until the mechanical end. 3) Close the two pins simultaneously to maintain the head. 4) Strip the cable properly check the recommended size in the catalog on page 176. GOOD 178 WRONG WRONG 5) Place conductors, with no deteriorations, in the bucket contact.
PAGE 179
UTS Series | Technical Information Extraction Tools Contact size Extractor #20 Ø 1 mm RX20D44 #16 Ø 1.6 mm RX2025GE1 #12 Ø 2.4mm 51060210924 #8 Ø 3.6mm 51060210936 RX2025GE1 51060210936 RX20D44 51060210924 Contact extraction instruction Place the tool into the cavity from front face of the connector, push on the handle, then remove the contact. L Shell size L1 UTS7 UTS0 UTS0 UTS7 L max L1 max L2 max L3 max L max L1 max L2 max L3 max 8 42.8 36.8 80.7 57.2 46.8 36.8 85.8 57.
PAGE 180
UTS Series | Technical Information Assembly Instructions UTS0 Assembly (Mounting Suggestion) • • • • Strip wires, crimp or solder contacts (see pages 176 & 177) Insert contacts into connector cavities (insert manually or use tool RTM205 crimp contacts) Place receptacle in the panel cut-out Secure receptacle with screws (not supplied) Tighten screws: M2.5 (recommended torque: see table below) • For complete sealing of the system use optional gasket and sealed screw solution (not sold by Souriau).
PAGE 181
UTS Series | Technical Information UTS7 Assembly (Mounting Suggestion) • Strip wires and crimp contacts (see pages 176 & 177) • Insert contacts into connector cavities (insert manually or use tool RTM205 crimp contacts ) • Seat o-ring, place receptacle in the panel cut-out • Tighten jam nut Shell size Jam nut torque (Nm) maxi Exterior jam nut dim. (mm) 8 1.5 19.0 10 3 22.2 12 4 27.0 14 5 30.1 18 5 36.
PAGE 182
UTS Series | Technical Information Assembly Instructions (Continued) • UTS1JC or UTS6JC Assembly: Crimp Version • Slide accessories onto the cable Adapter + mounted gasket UTS6   Cable range Make sure the seal is positioned as shown.
PAGE 183
UTS Series | Technical Information • UTS6JC Screw Termination Assembly • Mate the plug with a corresponding receptacle equiped with its contacts • Choose and place right seal depending on cable diameter (see table below) 1 • Slide accessories on the cable • Strip external jacket (see table below). 2 Receptacle Plug Nut • Strip the wires (strip length 5.8 mm) • Place the conductors in the contact barrel.
PAGE 184
UTS Series | Technical Information Assembly Instructions (Continued) UTS1GJC or UTS6GJC Assembly • Slide accessories onto the cable (make sure to keep compression ring on the grommet) • Strip external cable jacket • Strip wires and crimp contacts (see pages 176 & 177) • Insert first contact into the grommet (first contact in cavity A, no tool is required).
PAGE 185
UTS Series | Technical Information Mating Procedure UTS Coupling Procedure The pictures below provide step by step instructions on how to mate a plug and receptacle connector in order to avoid damaging any of the contacts. • Identify the primary key of each connector. 1 • Align the primary keys of the connectors. 2 • Offer the plug to the receptacle.
PAGE 186
UTS Series | Technical Information Rated Current & Working Voltage Current Carrying Capacity The current carrying capacity of a connector is limited by the thermal properties of materials used in its construction. The amount of current that can be handled depends on the size of cable used, the ambient temperature and the heat that is generated inside the connector.
PAGE 187
UTS Series | Technical Information UV Resistance Exposure in Natural Environment Solar radiation affects all materials, but plastics can be susceptible to extreme degradation over time. The choice of materials for the UTS series was therefore a critical consideration. Yearly mean of daily irradiation in UV (280-400 nm) on horizontal plane (J/cm²) (1990-2004) 90° 60° All over the world we are not exposed to the same amount of energy given by the sun. The chart shown here clearly illustrates this.
PAGE 188
UTS Series | Technical Information UL94 + UL1977 Underwriter Laboratories There are two main standards for industrial connectors: UL94 & UL1977 UL94 This standard is dedicated to plastics flammability. It characterises how the material burns in various orientation and thicknesses. The UTS series has been rated at V-0 & HB. Procedure: A specimen is supported in a vertical or horizontal position and a flame is applied to the bottom of the specimen.
PAGE 189
UTS Series | Technical Information Underwriter Laboratories UL1977 There are several standards which deal with plug and receptacle. Each of them is only for a small area of applications. It could be telecommunication, etc. The UL 1977 covers single and multipole connectors intended for factory assembly. Requirements apply to devices taking into account intensity and voltage.
PAGE 190
UTS Series | Technical Information UL94 + UL1977 (Continued) Underwriter Laboratories UL1977 Spacing: For a 250V max connector, distance through air or over material shall be 1.2mm whereas from 250V to 600V connector the spacing is 3.2mm minimum.
PAGE 191
UTS Series | Technical Information IEC 61984 & IP Codes Explained IEC 61984 The norm is dedicated to connectors with rated voltage above 50V and up to 1000V and rated currents up to 125A per contact. Depending on your application connectors should be compliant with another standard. This has to be double checked with the customer. There are a lot of constructional requirements and performances specified in that standard. Most of them are illustrated in greater details hereafter.
PAGE 192
UTS Series | Technical Information IEC 61984 & IP Codes Explained (Continued) IEC 61984 Overvoltage UTS connectors are qualified to be used on systems rated at Overvoltage category III Per the IEC 60664-1 (formely VDE 0110) each category is linked to the end application and where the device will be implemented: • Category IV (primary overcurrent protection equipment): Origin of the installation • Category III (any fixed installation with a permanent connection) Fixed installation and equipment and for cases
PAGE 193
UTS Series | Technical Information IEC 61140 Explained IEC 61140 On a daily basis, we are using many electrical appliances, some are grounded, and some are not.
PAGE 194
UTS Series | Technical Information What is NEMA Rating ? • NEMA ratings vs IP ratings Whereas IP ratings only consider protection against ingress of foreign bodies (first digit) and ingress of water (second digit), NEMA ratings consider these but also verify protection from external ice, corrosive materials, oil immersion, etc. The correlation between NEMA & IP being limited only to dust and water, we can state that a NEMA type is equivalent to an IP rating but it is not possible to say the contrary.
PAGE 195
UTS Series | Technical Information Ethernet for the Layman In order to explain basic Ethernet theory, we can use a functional comparison to a busy city with highways, buildings and cars. To illustrate this, the table below provides correlation between the different components/pieces/links that encompass Ethernet network connectivity, and the larger scale infrastructure of a metropolitan city. The network itself End equipment, PC, server, etc. Ethernet cabling Data packets, datagrams, bits, bytes, etc.
PAGE 196
UTS Series | Technical Information Ethernet for the Layman (Continued) Souriau offering: Standard solutions. UTS Hi seal size 8, 4 contacts 1 (Pair 1) Ã A 2 (Pair 1) Ã C 3 (Pair 2) Ã B 4 (Pair 2) Ã D UTS size 10, 6 contacts 1 (Pair 1) Ã A 2 (Pair 1) Ã B 3 (Pair 2) Ã E 4 (Pair 2) Ã D 8E4/8D4 4 Ø 1mm (#20) UTS size 12, 10 contacts 1 (Pair 1) Ã C 2 (Pair 1) Ã B 3 (Pair 2) Ã G 4 (Pair 2) Ã H 106/10E6/10D6 6 Ø 1mm (#20) 1210/12E10/12D10 10 Ø 1mm (#20) Shielding continuity done in cavity C&F.
PAGE 197
Technical Information UTS Series | Technical Information 197
PAGE 199
UTS Series Appendices #16 Coaxial Contacts/Cabling Notices ................................................................... 200 Glossary of Terms ................................................................................................. 207 Discrimination/Keying Methods .............................................................................. 208 Part number Index .................................................................................................
PAGE 200
UTS Series | Appendices #16 Coaxial Contacts Coaxial Cable - Contact Monocrimp and Multipiece Cable type 200 Ø over jacket Impe- Contact dance type Ø over dielectric inch mm inch mm Inner cond size Ø outer braid Ext. Ø mm inch mm - - Male contact kit for coaxial cable RG161/U 75 0.09" 2.29 0.057" 1.45 - RG179A/U 75 0.105" 2.67 0.063" 1.6 0.3 0.084" 2.13 max RG179B/U 75 0.105" 2.67 0.063" 1.6 0.3 0.084" 2.13 max RG187/U 75 0.11" 2.79 max 0.06" 1.52 0.
PAGE 201
UTS Series | Appendices Cable type Contact type Inner AWG cond Ø over jacket (single wire) Ø outer braid Inner cond size inch mm Stranded definition Ext. Ø mm inch mm Male contact kit for coaxial cable Female contact kit for coaxial cable 2#24 stranded mil-w-16878 type B 24 0.049" 1.24 max 7/.008 - - - RMDXK10D28 RCDXK1D28 2 #24 solid mil-w-76 type LW 24 0.047" 1.12 max 1/.0201 - - - RMDXK10D28 RCDXK1D28 26 0.043" 1.09 max 7/.0063 0.
PAGE 202
UTS Series | Appendices #16 Coaxial Contacts (Continued) Twisted Pair Cable Multipiece Contact Cabling Cable reference Contact type Male contact Female contact Crimp tool Die set Stop bushing - - Cable strip length A B C Inner conductor crimp g dim t dim Braid crimp g dim t dim 2#24 stranded mil w 16878 type B 2 #24 solid mil-w-76 type LW 2 #26 stranded mil w 76 type LW or mil w16878 type B & E Multi piece 2 #28 solid mil-w-81822/3 RMDXK10D28 RCDXK1D28 M10S1J See assembly notice twisted pa
PAGE 203
UTS Series | Appendices Twisted Pair Cable Monocrimp Contact Cabling Contact type Cable reference Male contact Female contact Crimp tool #28 7/.0036 per Hitachi spec ec-711 (13-2820) Die set S80 Stop bushing SL105 Cable strip length A B C 4.7 6.1 Inner conductor crimp g dim t dim Braid crimp g dim t dim 3.07 to 2.9 4.32 1.30 to 1.12 1.4 to 1.22 2.97 to 2.84 1.4 to 1.22 2.97 to 2.84 3.07 to 2.79 20218204 S80 SL105 3.94 6.1 3.16 1.30 to 1.17 #30 solid S83 SL105 4.7 6.1 4.
PAGE 204
UTS Series | Appendices #16 Coaxial Contacts (Continued) Multipiece Male Contact with Coax Cable Cable reference RG161U RG179 RG187U RG188/U RG174/U RG178A/U RG196U Hyring complementary compoments Contact Outer contact crimp tool Inner contact crimp tool Crimp tool M10S1J Crimp tool M10S1J Die set Stop bushing Die set A B C 4.37 7.95 15.88 4.37 7.95 15.88 4.37 7.95 15.88 4.37 7.95 15.88 4.37 7.95 15.88 7.54 9.12 17.53 7.54 9.12 17.53 - 4.37 7.95 15.88 - 4.37 7.
PAGE 205
UTS Series | Appendices Multipiece Female Contact with Coax Cable Cable reference RG161U RG179 RG187U RG188/U RG174/U RG178A/U RG196U Hyring complementary compoments Contact Outer contact crimp tool Inner contact crimp tool Crimp tool M10S1J Crimp tool M10S1J Die set Stop bushing Die set Stop bushing S23D2 S26D2 Female: RCDXK1D28 21-598 S221 YOC074 + RMDXB0553 SL471 8134 B C 4.37 11.13 4.37 11.13 4.37 11.13 4.37 11.13 4.37 SL46D2 S23D2 YOC074 surprenant pn 6.35 11.
PAGE 206
UTS Series | Appendices #16 Coaxial Contacts (Continued) Coax Cable with Monocrimp Contact Cabling Cable reference Male contact Female contact CDC PIN22939200 RMDX6046D28 RCDX6016D28 CDC PIN22939200 RMDX6046D28 RCDX6016D28 CDC PIN245670000 RMDX6050D28 RCDX6016D28 KX21TVT (europe) RG178 B/U RMDX6034D28 Crimp tool RCDX6034D28 Cable strip length Inner conductor crimp g dim t dim Braid crimp Die set Stop bushing A B C g dim t dim S80 SL105 4.19 5.97 8.51 1.30/1.17 1.40/1.22 2.
PAGE 207
UTS Series | Appendices Glossary of Terms • Clearance Per the IEC 60664-1 it is the shortest distance between two conductive parts even over the air. • Creepage distance Per the IEC 60664-1 it represents the shortest distance along the surface of the insulating material between two conductive parts. • CTI (Comparative Tracking Index) The CTI value is commonly used to characterise the electrical breakdown properties of an insulating material. It allows users to know the tendency to create creepage paths.
PAGE 208
UTS Series | Appendices Discrimination/Keying Methods In applications where similar connectors are used next to each other, mismatching can cause disturbances, system failure or even danger to operating personnel. To eliminate mismatching, some Trim Trio® connectors are offered with discrimination keys to avoid interconnection system errors. In addition, the connector insert can also be rotated inside the shell to create custom keying options.
PAGE 209
UTS Series | Appendices Part Number Index UTS0104P................... UTS0104S................... UTS010D6P.................. UTS010D6S.................. UTS710D6P.................. UTS710D6P32................ UTS710D6S.................. UTS710D6S32................ UTS010D98P................. UTS010D98S................. UTS010E6P.................. UTS010E6S.................. UTS010E7P.................. UTS010E7S.................. UTS010E98P................. UTS010E98S................. UTS0124P..............
PAGE 210
UTS Series | Appendices Part Number Index (Continued) UTS610E6S.................. UTS610E7P.................. UTS610E7S.................. UTS610E98P................. UTS610E98S................. UTS61210P.................. UTS61210S.................. UTS6124P................... UTS6124PSCR................ UTS6124SSCR................ UTS6128P................... UTS6128S................... UTS612E10P................. UTS612E10S................. UTS612E14P................. UTS612E14S................. UTS612E2P.
PAGE 211
UTS Series | Appendices P. 64 P. 28 P. 28 P. 80 P. 80 P. 68 P. 68 P. 84 P. 84 P. 88 P. 88 P. 88 P. 88 P. 84 P. 84 P. 84 P. 84 P. 96 P. 96 P. 96 P. 96 P. 88 P. 88 P. 112 P. 112 P. 52 P. 52 P. 52 P. 52 P. 100 P. 100 P. 100 P. 100 P. 100 P. 100 P. 100 P. 112 P. 112 P. 112 P. 112 P. 128 P. 128 P. 128 P. 128 P. 24 P. 24 P. 24 P. 24 P. 48 P. 48 P. 48 P. 48 P. 52 UTS712D4P32................ UTS712D4S.................. UTS712D4S32................ UTS712D8P.................. UTS712D8P32................ UTS712D8S..
PAGE 212
UTS Series | Appendices Part Number Index (Continued) UTS78E33P.................. UTS78E33S.................. UTS78E3AP.................. UTS78E3AS.................. UTS78E3P................... UTS78E3S................... UTS78E4P................... UTS78E4S................... UTS78E98P.................. UTS78E98S.................. UTS7GJC104P................ UTS7GJC128P................ UTS7GJC1412P............... UTS7GJC147P................ UTS7GJC1492P............... UTS7GN104P.................
PAGE 213
UTS Series | Appendices 85005585A.................. 85005586A.................. 85005587A.................. 85005588A.................. 85005590A.................. 85005594................... 85005595................... 85005596................... 85005597................... 85005599................... UTS18DCG2.................. UTS610CCRG................. UTS610CCRR................. UTS610CCRY................. UTS612CCRG................. UTS612CCRR................. UTS612CCRY................. UTS614CCRG.
PAGE 214
UTS Series | Appendices Part Number Index (Continued) RM24W3K.................... RM28M1GE1K................. RM28M1K.................... RMD26L1D28................. RMDX6015D28................ RRMDX6018D28............... RMDX6019D28................ RMDX6024D28................ RMDX6026D28................ RMDX602D28................. RMDX6031D28................ RMDX6032D28................ RMDX6034D28................ RMDX6036D28................ RMDX6050D28................ RMDX6052D28................ RMDXB0553.
PAGE 215
PAGE 216
Your local contact Our contribution to environmental protection: This catalog is printed on PEFC certified paper Advancement of sustainable wood cultivation. www.pefc.org www.souriau-industrial.com contactindustry@souriau.com WCAUTSEUSEN01 © Copyright SOURIAU March 2014 - SOURIAU is a registered trademark All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement.