Datasheet

180
UTS Series
|
Technical Information
• Strip wires, crimp or solder contacts (see pages 176 & 177)
• Insert contacts into connector cavities (insert manually or use tool RTM2 0 5 crimp contacts)
• Place receptacle in the panel cut-out
• Secure receptacle with screws (not supplied)
Tighten screws: M2.5 (recommended torque: see table below)
• For complete sealing of the system use optional gasket and sealed screw solution (not sold by SOURIAU).
UTS 0 Assembly (Mounting Suggestion)
Assembly Instructions
Rearmounting:CrimpversionFrontmounting:Crimpversion
Gasket (optional)
Gasket (optional)
Optional
coding ring
Optional
coding ring
Panelthickness:
2.5mm max
Panel
Receptacle ange
Receptacle ange
3mm max
3mm max
Gasket (optional)
Optional
coding ring
Optional
coding ring
Rearmounting:SolderversionFrontmounting:Solderversion
Gasket (optional)
Shell size
10 12 14 16 18
Screw tightening torque
(Nm)
0.30/0.40 0.30/0.40 0.30/0.40 0.30/0.40 0.35/0.45
1 1
2 2
3 3