Datasheet

WITH

UTS Series

8E33/8D33

Speciﬁ cations

Contact type Connector type Backshell

Part number

Male insert Female insert

Handsolder

electrical contacts

loaded

Square ﬂ ange

receptacle

Without (Fig.1)

UTS08E33P UTS08E33S

Plug

Without (Fig.6)

UTS68E33P UTS68E33S

Cable gland (Fig.7)

UTS6JC8E33P UTS6JC8E33S

Jam nut

receptacle

Without (Fig.3)

UTS78E33P UTS78E33S

PCB

contacts loaded

Square ﬂ ange

receptacle

Without (Fig.2)

UTS08D33P UTS08D33S

Jam nut receptacle

with stand off and

with hold down clips

Without (Fig.5)

UTS78D33P32 UTS78D33S32

Jam nut receptacle

with stand off and

without hold down clip

Without (Fig.4)

UTS78D33P UTS78D33S

Layout

Sealed unmated

PAGE 1
UTS Series 8E33/8D33 Layout OR OR WITH Specifications Contact type Handsolder electrical contacts loaded Connector type Backshell Square flange receptacle Plug Part number Male insert Female insert Without (Fig.1) UTS08E33P UTS08E33S Without (Fig.6) UTS68E33P UTS68E33S Cable gland (Fig.7) UTS6JC8E33P UTS6JC8E33S Jam nut receptacle Without (Fig.3) UTS78E33P UTS78E33S Square flange receptacle Without (Fig.
PAGE 2
UTS Series 8E33/8D33 3 contacts 7A/50V per IEC 61984 Dimensions Square flange receptacle - UTS0 7.5 11.7 20.7 7.8 15.3 7.5 Ø12 Ø12 11.7 2.4 Ø3.2 2.4 Fig. 1 Front view Fig. 2 Jam nut receptacle - UTS7 3.4 24.2 3.4 4.2 Ø12 24.2 18 Ø12 18 Ø12 18 3.5 3.5 Fig. 3 Mechanics 3.4 3.5 Fig. 4 Front view Fig. 5 Plug - UTS6 Mated connector length Fig. 6 61.1 25.3 Ø22.5 UTS0 UTS7 66.6 54 Fig.
PAGE 3
UTS Series 8E33/8D33 Accessories Jam nut sealing caps Metal terminal Part number UTS8DCG Part number Part number UTS8DCGR UTS8DCGE UTS68C Part numbers Part numbers / neoprene 85005585A 85005594 IP40 Part number Gasket Plug cap Plug protective cap Metal terminal Plastic protective cap Receptacle cap Square flange sealing cap UTFD11B Electrical characteristics UTS 8E33/8D33 de-rating curves Current (A) 18 16 UL 7A 250V UL94 HB CSA 7A 250V UL94 HB 14 Test conditions Contact used: Ma