User Manual

15
Error code E3:
The anti-dry sensor shorts out as it got broken.
The circulator will stop. Error code E3 will be featured on the display.
Please, contact Customer Service team.
Error code E4:
When the water level is lower than the MIN mark or the circulator is not
immersed in the water, and the water shortage sensor is failed to be activated,
the dry boil sensor will be activated and stop working. All symbols went out
and only display the error code E4. Till the circulator heater cool down, the
circulator will resume to working.
Error code E5:
The temperature sensor is in open loop which is caused by the loose
connection wire.
The circulator will stop. Error code E5 will be featured on the display.
Please, contact Customer Service team.
Error code E6:
Temperature sensor shorts out as it got broken.
The circulator will stop. Error code E6 will be featured on the display. Please, c
ontact Customer Service team.
Correct Disposal of this product
This marking indicates that this product should not be
disposed of with other household wastes throughout the
EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the
return and collection systems or contact the retailer
where the product was purchased. They can take this
product for environmentally safe recycling.