Setup Instructions

ELSEMA
8, 12, 16 Channel, Handheld 915MHz Transmitter with Fast Frequency Hopping.
6
Example:
Using a 4-channel MCR91504 receiver with a 1-channel MCT91501 transmitter.
If the MCR91504 has 0101 0100 1000 set to the 12 way dipswitch, this sets the receiver first relay
(Ch.1) to position 9 i.e. 1000. The other channel addresses are sequentially placed.
This is shown in the table below:
Relay
Channel
Position DS
9
DS
10
DS
11
DS
12
Comment
1 9 1 0 0 0 First Relay, Channel 1
on MC
R
91504
2 10 1 0 0 1 MCT91502 operates
Rela
y
2 and 3
3 11 1 0 1 0 MCT91502 operates
Rela
y
2 and 3
4 12 1 0 1 1 MCT91501 operates
Rela
y
4
To program a 1-button MCT91501 transmitter to receiver relay channel 4 you need to set the
transmitters dip switch to
0101 0100 1011.
To program a 2-button MCT91502 transmitter to receiver relay channel 2 and 3 you need to set the
transmitter dip switch to 0101 0100 1001. The second button on the transmitter automatically
operates relay 3
This example is shown graphically below: