Instruction Manual

2. Wireless control of S6 radio:
2.1 Connect the S6 radio wifi with mobile phones, handbooks and other
Internet-connected electronic products (make sure the radio wifi hotspot is turned on
before connecting)
2.2 Enter the dedicated web page 10.1.1.1 (account admin. password admin), select
the radio settings to wirelessly control the S6 radio.

Chapter5. The radio parameters of S6
Radio characteristics
Support agreement SOUTH 9600/SOUTH 19200/SOUTH+
SOUTHx/TrimTalk 450S/TrimMark II
TrimMark III/HUACE
Hi-Target/Satel 3AS
Power RF output power: 10W, 20W, 30W
Frequency Range 410MHz - 470MHz
Bandwidth 25KHz
baud rate 9600/19200
Number of channels 120
Use interaction Boot mode Button boot
Operation method Button / Bluetooth software / WIFI
webpage
Display
VFD vacuum LCD screen
Button 6 buttons, up and down keys switch,
left and right button selection, power
button confirmation / switch button, C
button return
Indicator light 4 indicators, BT Bluetooth light /
DATA data light AUX power lamp /
PWR power lamp
Internal
communication
WIFI
802.11b/g/n,Support AP hotspots
Bluetooth Bluetooth 3.0
Interface information Dataline interface Standard RS232 serial port, LEMO 5
core
Antenna interface Standard TNC mouthpiece
Power interface
Power supply four core LEMO
Physical
characteristics
Operating temperature
-20℃-55℃
storage temperature
-40℃-85℃
Dustproof and waterproof
IP67
Drop withstands 1.2m free drop onto hard surface
Size
144mm*174mm*65.6mm
Weight 1.5 KG