User Manual

-12-

For Machines Mfg. Since 8/09

Model SB1029

PREPARATION

Unpacking

This item was carefully packaged to prevent

damage during transport. If you discover any

damage, please immediately call Customer

Service at (360) 734-1540 for advice. You may

need to file a freight claim, so save the containers

and all packing materials for possible inspection

by the carrier or its agent.

Inventory

Main Inventory 1: (See Figure 4) Qty

A. Surface Grinder (Wheel Installed) ................ 1

Tool Box Inventory: (See Figure 5) Qty

B. Column Elevation Handwheel ......................1

C. Column Elevation Handwheel Crank ........... 1

D. Cast Iron Feet ................................................5

E. Tool Box .......................................................... 1

F. Dressing Tool Base ........................................1

G. Diamond-Tip Dressing Tool ...........................1

H. Hub Puller ......................................................1

I. T-Bolt Set .......................................................1

J. Feet Studs ......................................................5

K. Standard Screw Driver #2 .............................1

L. 10-Pc Hex Wrench Set

(1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8, 10mm) ...............1

M. Spindle Wrench 47mm ..................................1

N. Spindle Wrench 27mm .................................. 1

O. Adjustable Wrench 8" .................................... 1

P. Balancing Spindle ..........................................1

Figure 4. Main inventory.

Figure 5. Small parts inventory.