Product Sheet

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
STANDARD CONSTRUCTION SPECIFICATIONS
12" Sectional Range
Full-Width Uniform Hot Top
Model P12C-H with optional 24" ue riser
 P12N-H (Modular Mount)
 P12C-H (Cabinet Base)
Standard Features
• Standard (2) years limited parts and labor warranty
(reference http://www.southbendnc.com/service.html for
limited warranty details).
• 12" wide sectional range with full-width uniform hot top
available with a cabinet base or as a modular unit (for
mounting on countertop, refrigerated or freezer base)
• Two 16,000 BTU NAT (16,000 BTU LP) burners with one
high/low control knob
• Electronic pilot ignition - Piezo
• Removable steel plates with 700°F surface temperature
on high setting
• 9-1/4" deep front rail
• Stainless steel front, sides, rear and exterior bottom
• Fully insulated lining and burner box
• 1-1/4" front gas manifold and 1" rear gas connection
• 5"highstainlesssteelueriser
• Free battery-design assistance
Standard Features of Cabinet-Base Model
• Stainless steel cabinet base with a removable door that
can hinge on the right or the left
Exterior Finish: Front, sides, rear and exterior bottom
constructed of #3 polished 430 and 304 stainless steel.
Range: 12"-wide front-manifold sectional range with full-
width 32,000 BTU NAT (32,000 BTU LP) uniform hot top with
removable stainless steel plates and a surface temperature of
up to 700°F (371°C).
Front Rail: 9-1/4" front rail.
Flue Riser: 5"highstainlesssteelueriser
Battery: Unit can be in any position in a battery. If the unit is
at the end of the battery, the end side will be solid (rather than
have a coverplate over the end of the front manifold).
Legs: 6" stainless steel adjustable legs standard.
Cabinet Base: Stainless steel cabinet base with a removable
door that can hinge on the right or the left.
Printed in USA
Form P12-H Rev 8 (April/2014)