Product Sheet

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
STANDARD CONSTRUCTION SPECIFICATIONS
16" Sectional Range
Full-Width Charbroiler
Model P16C-C with optional 24" ue riser
 P16N-C (Modular Mount)
 P16C-C (Cabinet Base)
Standard Features
• Standard (2) years limited parts and labor warranty
(reference http://www.southbendnc.com/service.html for
limited warranty details).
• 16" wide sectional range with full-width charbroiler available
with a cabinet base or as a modular unit (for mounting on
countertop, refrigerated or freezer base)
• Two 20,000 BTU NAT (18,000 BTU LP) burners with one
high/low control knob
• Removable cast iron grates with adjustable front-to-back
slope that ip over for either 1/8" or 1/4" grid width
• 600°F even surface temperature on high setting
• Stainless steel burner radiants
• 9-1/4" deep front rail
• Removable drippings tray
• Stainless steel front, sides, rear and exterior bottom
• Fully insulated lining and burner box
• 1-1/4" front gas manifold and 1" rear gas connection
• 5" high stainless steel ue riser
• Free battery-design assistance
Standard Features of Cabinet-Base Model
• Stainless steel cabinet base with a removable door that can
hinge on the right or the left.
Exterior Finish: Front, sides, rear and exterior bottom
constructed of #3 polished 430 and 304 stainless steel.
Range: 16"-wide front-manifold sectional range with
40,000 BTU NAT (36,000 BTU LP) full-width charbroiler with
removable cast iron grates and operating surface temperature
of up to 600°F (315°C).
Front Rail: 9-1/4" deep front rail.
Flue Riser: 5" high stainless steel ue riser.
Battery: Unit can be in any position in a battery. If the unit is
at the end of the battery, the end side will be solid (rather than
have a coverplate over the end of the front manifold).
Legs: 6" stainless steel adjustable legs standard.
Cabinet Base: Stainless steel cabinet base with a removable
door that can hinge on the right or the left.
Printed in USA
Form P16-C Rev 8 (April/2014)