Product Sheet

Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
STANDARD CONSTRUCTION SPECIFICATIONS
18" Sectional Range
French Hot Top
 P18N-F (Modular Mount)
 P18C-F (Cabinet Base)
Standard Features
• Standard (2) years limited parts and labor warranty (reference
http://www.southbendnc.com/service.html for limited warranty
details).
• 18" wide sectional range with french hot top available with
cabinet base, or as a modular unit (for mounting
on countertop, refrigerated or freezer base)
• One 40,000 BTU NAT (35,000 BTU LP) burner
• Battery spark ignition
• Removable steel plate with center surface temperature up
to 900°F at the center
• High/Low setting
• 9-1/4" deep front rail
• Stainless steel front, sides, rear and exterior bottom
• Fully insulated lining and burner box
• 1-1/4" front gas manifold and 1" rear gas connection
• 5"highstainlesssteelueriser
• Free battery-design assistance
Standard Features of Cabinet-Base Model
• Stainless steel cabinet with removable door.
Exterior Finish: Front, sides, rear and exterior bottom
constructed of #3 polished 430 and 304 stainless steel.
Range: 18"-wide front-manifold sectional range with french
hot top with a 40,000 BTU NAT (35,000 BTU LP) burner.
Removable steel plate and an operating surface temperature
of up to 900°F (482°C).
Front Rail: 9-1/4" deep front rail.
Flue Riser: 5"highstainlesssteelueriser
Battery: Unit can be in any position in a battery. If the unit is
at the end of the battery, the end side will be solid (rather than
have a coverplate over the end of the front manifold).
Legs: 6" stainless steel adjustable legs standard.
Model 36C: Stainless steel cabinet base with one removable
door.
Printed in USA
Form P18-F Rev 0 (March/2014)
Model P18C-F with optional 24" ue riser