Platinum Series Griddle User Manual

PLATINUM SERIES RANGE
OWNER’S MANUAL 1185836 REV 8 (9/14)
PAGE
3
OF 47
INTRODUCTION
Congratulations! You have purchased one of the nest pieces of heavy-duty commercial cooking equipment on the
market.
You will nd that your new equipment, like all Southbend equipment, has been designed and manufactured to meet the
toughest standards in the industry. Each piece of Southbend equipment is carefully engineered and designs are veried
through laboratory tests and eld installations. With proper care and eld maintenance, you will experience years of
reliable, trouble-free operation. For best results, read this manual carefully.
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This manual is for Southbend Platinum Series Sectional Ranges.
This manual does NOT cover Southbend sectional fryers, fryer lter systems, salamander broilers, upright broilers,
cheese melters, or refrigerated bases. Those appliances have their own manuals.
The location of the serial plate depends on the type of base (see Figure 1 below). On models with oven bases, the
serial plate is located on the backside of the kick-plate below the oven door (lift the kick-plate straight up and tilt the top
edge out and down.) On models with a cabinet base, the serial plate is located inside the left cabinet door. On modular
(countertop) models, the serial plate is located inside the front valve panel.
Read these instructions carefully before attempting installation. Installation and initial startup should be performed by
a qualied installer. Unless the installation instructions for this product are followed by a qualied service technician (a
person experienced in and knowledgeable with the installation of commercial gas and/or electric cooking equipment) then
the terms and conditions on the Manufacturer’s Limited Warranty will be rendered void and no warranty of any kind shall
apply.
In the event you have questions concerning the installation, use, care, or service of the product, contact:
Southbend Technical Service
1100 Old Honeycutt Road
Fuquay-Varina, North Carolina 27526 USA
www.southbendnc.com
Location of Serial Plate
Figure 1
Location of Serial Plate
INTRODUCTION