Product Sheet
Job Item#
www.yatesgd.com www.yatesgraphicdesign.com
STANDARD CONSTRUCTION SPECIFICATIONS
24" Sectional Range
Full-Width Uniform Hot Top
Model P24C-HH with optional 24" ue riser
P24N-HH (Modular Mount)
P24C-HH (Cabinet Base)
Standard Features
• Standard (2) years limited parts and labor warranty
(reference http://www.southbendnc.com/service.html for
limited warranty details).
• 24" wide sectional range with full-width uniform hot top
available with a cabinet base or as a modular unit (for
mounting on countertop, refrigerated or freezer base)
• Four 16,000 BTU NAT (14,000 BTU LP) burners with two
high/low control knobs
• Electronic pilot ignition - Piezo
• Removable steel plates with 700°F surface temperature on
high setting
• 9-1/4" deep front rail
• Stainless steel front, sides, rear and exterior bottom
• Fully insulated lining and burner box
• 1-1/4" front gas manifold and 1" rear gas connection
• 5"highstainlesssteelueriser
• Free battery-design assistance
Standard Features of Cabinet-Base Model
• Stainless steel cabinet with removable doors that open from
the center
Exterior Finish: Front, sides, rear and exterior bottom
constructed of #3 polished 430 and 304 stainless steel.
Range: 24"-wide front-manifold sectional range with full-
width 64,000 BTU NAT (56,000 BTU LP) uniform hot top with
removable steel plates and a surface temperature of up to
700°F (371°C).
Front Rail: 9-1/4" deep front rail.
Flue Riser: 5"highstainlesssteelueriser
Battery: Unit can be in any position in a battery. If the unit is
at the end of the battery, the end side will be solid (rather than
have a coverplate over the end of the front manifold).
Legs: 6" stainless steel adjustable legs standard.
Model 24C: Stainless steel cabinet base with two removable
doors that open from the center.
Printed in USA
Form P24-HH Rev 7 (April2014)