Product Sheet

1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Models:
FRONT VIEW
36" (914)
REAR VIEW
2-1/2" (64)
18"
(457)
6" (152)
20"
(508)
TOP VIEW
41"
(1041)
24"
(610)
60"
(1524)
41"
(1041)
72"
(1829)
Electrical
Connection
for Oven
Models
Rear Gas
Connection
5" Flue Riser
24" Flue Riser
36" Flue Riser
8-1/2" (216)
SIDE VIEW of MODULAR MODEL
SIDE VIEW
33-3/4"
(859)
Motor for
Convection
Oven Models
15-3/4"
(400)
36"
(914)
37-1/2"
(953)
9-1/4"
(235)
37-1/2" (953)
34" (864)
40" (1016)
43-1/2" (1105)
5" (127)
Front Gas
Manifold
20-1/2"
(521)
10
"
(254)
Optional extra-deep flue riser (cooking area is
same as for models with standard flue riser).
Optional Shelf
*(+/- 1” tolerance)
P36N-HHH P36C-HHH P36D-HHH P36A-HHH
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
OPTIONS and ACCESSORIES
MISCELLANEOUS
UTILITY INFORMATION
GAS: Each unit has a
1-1/4" front manifold
that couples to the
adjacent sectional
unit(s), and a 1" rear
gas connection with a
male NPT connector.
Minimum gas supply
pressure is 7" W.C. for
natural gas and 11"
W.C. for propane. All
sectional units require a regulated gas supply (a pressure regulator
mustbeorderedseparately).Ifusingaexible-hosegasconnection,
the inside diameter of the hose must not be smaller than the
connector on the unit and must comply with ANSI Z21.69, providing
an adequate means of restraint to prevent undue strain on the gas
connection.
ELECTRICITY: All oven models with optional electronic ignition
require 50Hz or 60Hz single-phase power. 120V models have a
7-foot power cord with ground plug (5.9A for "A" models). 208/240V
models have a terminal block for connection to a single-phase
208/240V source (2.7A for "A" models).
• Ifcastersareusedwithaexible-hosegasconnection,a
restraining device should be used to prevent undue strain
on the hose.
Minimum clearance from noncombustible construction is
zero (except there must be 2" clearance behind the blower
motor of convection-oven models). Minimum clearance
from combustible construction is 10" (254 mm) on sides
and 12" (305 mm) on rear.
Installation under a vented hood is recommended.
• Checklocalcodesforreandsanitaryregulations.
NOTICE:
Southbend has a policy of continuous product research and improve-
ment.Wereservetherighttochangespecicationsandproduct
design without notice. Such revisions do not entitle the buyer to cor-
responding changes, improvements, additions or replacements for
previously purchased equipment.
External pressure regulator
Front rail options:
Cutouts in front rail for sauce pans
7-1/4" deep front rail (to match old
style sectional)
Square belly bar mounted on 7-1/4"
deep front rail
Casters (front two casters lock)
Cable restraint kit (to restrict
movement when on casters)
24"or36"highueriser
Shelvesonueriser(oneon24"ue
riser,oneortwoon36"ueriser,10"
deep)
Tray or tubular shelving (12" deep)
Open-frame base with casters for
battery
Extra-deeprear-extendingueriser
Stainless steel oven interior
Salamander or cheesemelter mounted
on36"ueriserueriser
Removable shelf inside cabinet
Electronic oven pilot ignition (no charge)
Form P36-HHH Rev 9 (April/2014)
Dimensions shown in inches and (millimeters)
Shipping Crate DimenSionS & Weight
moDel WiDth height Depth Volume Weight
P36N-HHH
45.5"
(1156)
23"
(584)
55"
(1397)
33.3 cu ft
(0.94 cu m)
346 lbs
(156.9 kg)
P36C-HHH
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
(1.85 cu m)
523 lbs
(237.2 kg)
P36D-HHH
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
(1.85 cu m)
629 lbs
(285.3 kg)
P36A-HHH
45.5"
(1156)
45"
(1143)
55"
(1397)
65.2 cu ft
(1.85 cu m)
682 lbs
(309.3 kg)
moDel
gaS (Btu/hour) eleCtriCity (ampS)
natural propane 120V 208/240V
P36N-HHH 96,000 96,000 - -
P36C-HHH 96,000 96,000 - -
P36D-HHH 141,000 141,000 0* 0*
P36A-HHH 141,000 141,000 5.9* 2.7*
*Standing Oven Pilot Models
Solid shelving has
a depth of 10".
Tubed and Tray
shelving have a
depth of 11-1/8".