SOUTHERN ENTERPRISES INC. This product has been engineered for easy installation and is constructed for durability. Please take the time to read through and follow these assembly instructions. YOU CAN INSTALL THIS ITEM. WALL MOUNT FIREPLACE FA580500TX Suggested tools: Flat head screw driver, power drill, ¼” drill bit, 24” level, and a tape measure.
INSTALLATION INSTRUCTIONS Please count, identify and compare parts to the hardware and parts list on the preceding page to be sure all parts are present. You will also need a flat head screw driver, drill, ¼” drill bit, tape measure, and a 24” level. If any items are missing, please contact our parts/ service department at 800-633-5096 or in Dallas 972-869-0111 from 9 AM to 4 PM CDT Monday - Friday. Missing or damaged hardware and/ or parts will be replaced free of charge. WE DO NOT SELL PARTS.
. Measure the wall and mark the location of the center of each of the three screw mounting holes. See Figure 2. Using the level, make sure that all three marks are level on the wall. 14-1/4" 7-1/8" Drill three 1/4” holes into wall. 21-5/8" 6-3/8" Figure 2 – Screw Hole Location 4. Using the power drill and ¼” drill bit, drill three ¼” holes through the wallboard at the mounting hole marks. NOTICE Make sure not to drill into electrical wiring or plumbing pipes. 5.
7. Install the fireplace (1, Figure 4) onto the three mounting screws using the mounting holes (2, Figure 4). The proper and secure mounting of the fireplace is when the top edge of each of the mounting holes is resting securely on the mounting screw (3, Figure 4). NOTICE Using the level, check to make sure that the fireplace is horizontally level and vertically plumb (straight up and down). 1 2 3 Figure 4 – Install Fireplace 8.
NOTICE • • Make sure to remove the gel fuel canisters paper label (4, Figure 5) before installing the canister into the holder. Shake the gel fuel canister before installing it into the canister holder. Figure 5 –Fuel Canister Holder and Gel Fuel Canister 9. Install the gel fuel holders into the fireplace into the appropriate mounting hole (3, Figure 5) in the fireplace. 10.
DANGER • • • • • • • • ● ● ● PROLONGED USE OF THE GEL FUEL IN THE FIREPLACE WILL CAUSE THE FIREPLACE TO BECOME HOT AND POTENTIALLY CAN CAUSE BURNS IF TOUCHED. DO NOT BURN MORE THAN THREE CANISTERS OF FUEL AT ONE TIME. BEFORE LIGHTING THE FUEL, MAKE SURE THAT THE PAPER LABEL IS REMOVED FROM EACH OF THE GEL FUEL CANISTERS. USE LONG MATCHES TO LIGHT EACH CANISTER OF FUEL. DO NOT TOUCH THE CANISTERS WITH BARE HANDS UNTIL THE FLAME HAS BEEN EXTINGUISHED FOR 20 MINUTES.
Please count, identify and compare the unit’s parts against the hardware list shown on the first page of this manual to be sure that all parts are present. Extra hardware may be included. If any items are missing, please contact our parts/ service department at (800) 633-5096 9am-4pm Monday-Friday Central Time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE DO NOT SELL PARTS.
