Use and Care Manual

14 |
Attention! | ¡Atención! | Attention!
If your remote control does not work, follow
these instructions to reconnect it to the firebox:
Plug in the firebox and turn on the power manually. To
connect the remote to the firebox, hold down both the
flame button and the temperature button for 3
seconds. When “bL” appears and disappears from the
LED display, the remote control is ready to use.
Si su control remoto no funciona, siga estas
instrucciones para volver a conectarlo a la caja
de fuego:
Enchufe la cámara de combustión y encienda la
alimentación manualmente. Para conectar el control
remoto a la cámara de combustión, mantenga
presionado el botón de la llama y el botón de
temperatura durante 3 segundos. Cuando aparece
"bL" y desaparece de la pantalla LED, el control remoto
está listo para usar.
Si votre télécommande ne fonctionne pas, suivez
ces instructions pour la reconnecter à la
chambre de combustion:
Branchez la chambre de combustion et allumez l’appareil
manuellement. Pour connecter la télécommande à la
chambre de combustion, maintenez enfoncés les
boutons flamme et température pendant 3
secondes. Lorsque “bL” apparaît et disparaît de
l'affichage à LED, la télécommande est prête à être
utilisée.