BC403700TX Hulen Shoe Storage Bench Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
Hulen Shoe Storage Bench Assembly Instructions Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. A. Top Panel D. Left Side Panel G.
M. Drawer Back Panel P. Center Leg 1. Cam Bolt 4. Flat Head Screw ∅1/8"*1/2" 7. Handle Quantity of 4 Quantity of 1 Quantity of 16 Quantity of 48 Quantity of 4 N. Quantity of 4 Drawer Bottom Panel Q. Quantity of 1 Cushion 2. Quantity of 16 Cam Lock 5. Quantity of 4 Bolt for Handle 8. Medium Bolt ∅5/32"x3/4" Quantity of 4 ∅1/4"x1-1/2"L Page | 3 O. Quantity of 4 Leg 3. Wood Dowel 6. Quantity of 20 Ø8x30mm Quantity of 16 Round Head Screw Ø 1/8” x 5/8”L (for Back Panel ) 9.
10. Quantity of 1 Allen Wrench 13. Screw 16. Male Slide Left Quantity of 32 ∅1/8"x1" Quantity of 4 11. Quantity of 4 Flat Washer 14. Quantity of 4 Female Slide Left 17. Female Slide Right Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Quantity of 4 12. Spring Washer 15. Quantity of 4 Quantity of 4 Female Slide Right 18.
Hulen Shoe Storage Bench Assembly Instructions Screw with fingers to help align screws before using screwdriver. Attach Female Slide Left (14) to Left Side Panel (D) using Flat Head Screws (4). Tighten Flat Head Screws (4) with Phillips screwdriver. Figure 1 Attach Female Slide Right (15) to Right Side Panel (E) using Flat Head Screws (4). Tighten Flat Head Screws (4) with Phillips screwdriver.
Attach Female Slide Right (15) to Left Vertical Panel (F) using Flat Head Screws (4). Tighten Flat Head Screws (4) with Phillips screwdriver. Figure 3 Attach Female Slide Left (14) to Right Vertical Panel (H) using Flat Head Screws (4). Tighten Flat Head Screws (4) with Phillips screwdriver.
Insert Left Vertical Panel (F), Middle Vertical Panel (G) and Right Vertical Panel (H) into the grooves of Fixed Shelf Panel (C) as shown. Note: Make sure the holes for the Cam Locks are facing down on Panel (C) as shown. The finished edges on each panel should be facing the direction. Figure 5 Screw with fingers to help align cam bolts before using screwdriver.
Attach Legs (O) to Bottom Panel (B) using Bolts (9), Spring Washers (12) and Flat Washers (11). Tighten Bolts (9) with Allen Wrench (10). Attach Center Leg (P) to Bottom Panel (B) by hand. Figure 7 Insert Cam Locks (2) into corresponding holes on assembled unit from Figure 5. Screw Cam Bolts (1) and insert Wood Dowels (3) into corresponding holes on Top Panel (A) and Bottom Panel (B).
Attach Back Panel (I) to backside of the assembled unit from Figure 8 with Round Head Screws (6). Tighten Screws (6) with a Phillips screwdriver. Figure 9 Attach Male Slide Left (16) to Drawer Left Panels (K) using Flat Head Screws (4). Attach Male Slide Right (17) to Drawer Right Panels (L) using Flat Head Screws (4). Tighten Flat Head Screws (4) with Phillips screwdriver.
Attach Drawer Back Panel (M) to Drawer Side Panels (K/L) using Screws (13). Tighten Screws (13) with Phillips screwdriver. Insert Drawer Bottom Panel (N) into the grooves of assembled unit. Figure 11 Attach Drawer Front Panel (J) to assembled unit using Screws (13). Tighten Screws (13) with Phillips screwdriver. Attach Handle (7) to Drawer Front Panel (J) using Bolt for Handle (5). Tighten Bolt for Handle (5) with Phillips screwdriver. Repeat Figures 10-12 to complete the remaining drawers.
Insert drawers into assembled unit. Figure 13 Cover Cam Locks with Covers (23) as shown. Then place Cushion (Q) on the bench as shown.
Now your Hulen Shoe Storage Bench is ready for use.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.