CK1225T0TX Pyramid End Table Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO#11838 Max Top Load 40 lbs. Max Load Inside the Trunk 60 lbs.
CK1225T0TX Pyramid End Table Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw.
G 8 PCS Small Cam Screw ϕ6.8 x 36mm J Dowel M H 8 PCS Small Cam Lock ϕ15 x 12mm 8 PCS ϕ8 x 30mm 1 PC K Bolt 1 PC Wrench 8 PCS ϕ ¼” x 2 ¾” N I 1 PC L Screw 31 PCS ϕ 3.5 x 16mm O 1 PC Support Handle-A P Handle 2 PCS Handle-B Q 10 PCS Sponge Cushion Care and Cleaning Instructions: Before using, wipe with a clean dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.
CK1225T0TX Pyramid End Table Assembly Instructions PLEASE DO NOT OVER-TIGHTEN CAMBOLTS. PLEASE STOP WHEN YOU FEEL TIGHT Step 1: Put all parts on a soft surface to prevent scratches. Attach handle-A (N) to the top (A) using screws (L) and tighten with Phillips screwdriver as shown. Step 2: Attach handle-B (O) to front panel (B) using screws (L) and tighten with Phillips screwdriver as shown. Step 3: Screw small cam screws (G) into front panel (B) as shown.
Step 4: Attach handles (P) to left side panels (D) using screws (L) and tighten with phillips screwdriver as shown. Step 5: Screw small cam screws (G) into back panel (C) as shown. Step 6: Insert dowels (J) into side panels (D) as shown. Assemble side panels (D), front panel (B), back panel (C) and bottom panel (E) together using small cam screws (G), small cam locks (H), dowels (J) and sponge cushions (Q) as shown. Make sure the edges of bottom panel (E) are inserted into the grooves of all panels.
Step 7: Turn the trunk base upside down and attach legs (F) to the bottom of trunk using screws (K) as shown. Step 8: Attach Hinge (R) to back panel (C) and top panel(A) by using screws (L) as shown and then tighten all screw by phillips screwdriver(not included) Step 9: Attach support (M) to the top (A) and trunk base using screws (L) and tighten with Phillips screwdriver as shown. Put sponge cushions (Q) on front panel (B) as shown. Close the top. Top will close slowly.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.