Instructions / Assembly

Step 7:
Turn the trunk base upside
down and attach legs (F) to
the bottom of trunk using
screws (K) as shown.
Step 8:
Attach Hinge (R) to back
panel (C) and top panel(A)
by using screws (L) as
shown and then tighten all
screw by phillips
screwdriver(not included)
Step 9:
Attach support (M) to the top
(A) and trunk base using
screws (L) and tighten with
Phillips screwdriver as
shown.
Put sponge cushions (Q) on
front panel (B) as shown.
Close the top. Top will
close slowly.