LIGHTED CORNER CURIO CM0695-GOLDEN OAK CM0696-MAHOGANY Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
LIGHTED CORNER CURIO Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below . You may receive extra hardware with your unit.
LIGHTED CORNER CURIO Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below . You may receive extra hardware with your unit.
LIGHTED CORNER CURIO Assembly Instructions INSERT WOOD DOWELS (2) INTO PREDRILLED HOLES ON EDGE OF UPPER LEFT BACK RAIL (B) AND FIT INTO CORRESPONDING HOLES ON UPPER RIGHT BACK RAIL (A). INSERT FLAT HEAD LONG SCREWS (1) THROUGH PREDRILLED HOLES ON UPPER RIGHT BACK RAIL (A) AND TIGHTEN INTO CORRESPONDING HOLES ON UPPER LEFT BACK RAIL (B). AS SHOWN IN FIGURE 1 Figure 1 INSERT FLAT HEAD SHORT SCREWS (6) THROUGH METAL SHADE (16) AND TIGHTEN INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (C).
LIGHTED CORNER CURIO Assembly Instructions INSERT FLAT HEAD SHORT SCREW (6) 6 THROUGH MAGNET PLATE (8) AND 6 11 TIGHTEN INTO PREDRILLED HOLE ON 10 UPPER DOOR (G). INSERT FLAT HEAD SHORT SCREWS (6) THROUGH METAL G 7 PLATE (10) AND TIGHTEN INTO 13 PREDRILLED HOLES ON UPPER DOOR 12 (G). INSERT SMALL MACHINE SCREW (9) THROUGH PREDRILLED HOLES ON UPPER DOOR (G), METAL PLATE (10) AND TIGHTEN INTO HANDLE (11).
LIGHTED CORNER CURIO Assembly Instructions TIGHTEN CAM-BOLTS (3) INTO PREDRILLED HOLES ON UPSIDE OF BASE (N) AND FIT INTO CORRESPONDING HOLES ON BOTTOM EDGES OF PARTS (I,J,L,M). INSERT CAM-LOCKS(4) INTO BIG HOLE ON PARTS(I,J,L,M) WITH SLOT FOR SCREWDRIVER FACING OUTWARD.ROTATE CAM-LOCKS (4) CLOCKWISE TO SECURE CAM-BOLTS(3).PUSH COVERS (5) INTO CAM-LOCKS(4).ASSEMBLE LOWER SHELF(K) IN SAME MANNER.AS SHOWN IN FIGURE 7.
LIGHTED CORNER CURIO Assembly Instructions WITH AN ASSISTANT, PLACE UPPER CABINET ONTO LOWER CABINET, AND TIGHTEN LARGE MACHINE SCREWS (14) THROUGH PREDRILLED HOLES ON LOWER SHELF (K) INTO THREADED HOLES ON UNDERSIDE OF UPPER SHELF (F). AS SHOWN IN FIGURE 10. Figure 10 FIT SHELF SUPPORTS (15) INTO PREDRILLED HOLES ON INSIDE OF PARTS (A, B, D, E, I, J, L, M), AND PUT GLASS SHELVES (S) ON EACH SHELF SUPPORTS (15). AS SHOWN IN FIGURE 11.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
WARNING: USE THE PROPER BULB AND THE PROPER POWER SUPPLY LABELED ON THE LAMP HOLDER. THIS PRODUCT CAN ONLY BE USED INDOORS. IMPORTANT SAFETY INSTRUCTIONS WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING. READ AND FOLLOW ALL SAFETY INSTRUCTIONS DO NOT USE SEASONAL PRODUCTS OUTDOORS UNLESS MARKED SUITABLE FOR INDOOR AND OUTDOOR USE.