Installation Guide

ManualsBrandsSouthern Enterprises ManualsShelves & Shelf BracketsDiego Floating Shelf in White

EN710100TX Chicago Floating Shelf 10”-

Chocolate

EN710200TX Chicago Floating Shelf 10”-

Black

EN710300TX Chicago Floating Shelf 10”-

White

Assembly Instructions

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

Max loading weight:20lbs

Summary of content (6 pages)

PAGE 1
EN710100TX Chicago Floating Shelf 10”Chocolate EN710200TX Chicago Floating Shelf 10”Black EN710300TX Chicago Floating Shelf 10”White Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
PAGE 2
Chicago Floating Shelf 10"10" BLACK 111-100 CHICAGO FLOATING SHELF Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
PAGE 3
Chicago Floating Shelf 10" Assembly Instructions Important note: please remove Bracket “B” on back edge of shelf first. Place mounting bracket (B) against the wall at the desired location with the arrow pointing up on the. Use a level on top of bracket to insure bracket is level, then, Figure 1 mark each hole with a pencil. Remove the bracket. Tip: If mounting to sheet rock (cavity wall) it is advisable to mount at least one screw (without anchor) directly to a wall stud.
PAGE 4
Slide shelf (A) onto the mounting bracket (B) by aligning the two holes on shelf (A) to the poles on bracket (B), making sure the two small holes are B pointing down on the bottom of shelf (A). A Figure 3 Insert the two long screws (E) with a screwdriver to secure shelf (A) to bracket (B). Place level on top to insure product is level. Now you shelf is ready to use.
PAGE 5
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Needed Parts Letter Parts Description Quantity Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
PAGE 6
CAUTION Max shelf load capacity is achieved by mounting screw into studs or cement walls. If mounting to sheet rock (cavity wall) it is advisable to mount at least 1 screw (without anchor) directly to a wall stud. However do not leave either end of mounting bracket unsupported by at least one anchor. For hollow wall mounting you can use any of the holes in the back plate to suit where you require the mounting screws positioned. Note: Pipe bracket has a built in safety design feature.