GA1427C0TX - MAHOGANY FINISH WALL-MOUNT JEWELRY ARMOIRE ASSEMBLY INSTRUCTION For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
WALL MOUNT JEWELRY ARMOIRE Parts List A Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit.
WALL MOUNT JEWELRY ARMOIRE Assembly Instructions Assembly Instructions: Figure 1 15.875” 1. SELECT A SMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH. 2. YOU WILL NEED A PHILLIP SCREWDRIVER (not included). 3. MARK TWO HOLES ON WALL, THE DISTANCE BETWEEN TWO HOLES TO BE 15.75” AND SHOULD MATCH THE HANGERS ON BACK OF THE JEWELRY ARMOIRE (A). AT LEAST ONE SCREW SHOULD BE INSERTED INTO A WALL STUD. DRILL THE OTHER MARK 3/16” DIAMETER HOLE. INSERT PLASTIC ANCHOR (1) INTO THE HOLE ON WALL.
Parts Replacement Form Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product.