Instructions / Assembly

Page |
7
Figure 3
Insert Cam Locks (B) into holes on Upper
Back Panel (5).
Screw Cam Bolts (A) into threaded holes on
Lower Shelf Panel (6).
Attach Upper Back Panel (5) to Lower Shelf
Panel (6) using Cam Bolts (A).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
Attach Shelf Panels (8) to Middle Panels (7)
by inserting Wood Dowels (F) into
corresponding holes.
Figure 4
Insert Cam Locks (B) into holes on Upper
Back Panel (5) and Shelf Panel (6).
Screw Cam Bolts (A) into threaded holes on
Left Side Panel (2) and Right Side Panel (3).
Attach Left Side Panel (2) and Right Side
Panel (3) to assembled unit from Figure 3
using Cam Bolts (A) and Wood Dowel (F).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver or Cam Tool (X).
7
7