Instructions / Assembly

Page |
9
Figure 7
Insert Cam Locks (B) into holes on
assembled unit from Figure 5.
Screw Cam Bolts (A) into threaded holes on
Top Panel (1).
Attach Top Panel (1) to assembled unit using
Cam Bolts (A) and Wood Dowels (F).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver or Cam Tool (X).
Cover Cam Locks (B) with Cotton Mat (C).
Figure 8
Use Screws (L) to attach Lower Back Panel
(12) to unit.
Tighten Screws (L) with Phillips screwdriver.