HZ862400TX Hendrik Display-Top Apothecary Cabinet Assembly Instructions PO#: Page 1
Hendrik Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
13 Quantity of 1 14 Quantity of 1 Left Drawer Side Panel 16 Quantity of 1 Right Drawer Side Panel 17 Quantity of 1 Drawer Bottom Panel A Quantity of 16 Glass Top B Cam Bolt D Quantity of 25 Quantity of 16 Cam Lock E Quantity of 8 Screw G Dia. 1/8” x 1/2”L Quantity of 24 Screw H Dia. 5/32” x 1L Quantity of 2 Bolts Dia. 5/32” x 1/2”L Magnet Plate Page 3 15 Quantity of 1 Drawer Back Panel C Quantity of 16 Wood Dowel Dia.
J Quantity of 8 Shelf Pin M Quantity of 2 K Quantity of 4 Hinge N L Quantity of 2 Magnet Quantity of 8 Tilting Preventing Hardware Cotton Mat Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at 1-800-633-5096. Assembly Tool Required No.
Hendrik Display-Top Apothecary Cabinet Assembly Instructions Start with finger to help align Cam Bolts. Insert Cam Locks (B) into Corresponding holes on Middle Panel (6). Screw Cam Bolts (A) into threaded holes on Shelf Panel (4) and Bottom Panel (5). Attach Shelf Panel (4) and Bottom Panel (5) to Middle Panel (6) by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes until all panels meet. Tighten Cam Bolts (A) by rotating Cam Locks (B) clockwise using Phillips screwdriver.
Insert Cam Locks (B) into corresponding holes on Left Side Panel (2) and Right Side Panel (3). Screw Cam Bolts (A) into threaded holes on Top Panel (1). Attach Top Panel (1) to Left Side Panel (2) and Right Side Panel (3) by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes until all components meet. Tighten Cam Bolts (A) by rotating Cam Locks (B) clockwise using Phillips screwdriver. Cover Cam Locks (B) with Cotton Mat (N) provided.
Attach Drawer Side Panels (13/14) to Drawer Back Panel (15) using Screws (E). Tighten Screws (E) with Phillips screwdriver. Insert Drawer Bottom Panel (16) into the grooves of panels (13/14/15). Attach Drawer Front Panel (12) to the assembled unit using Screws (E). Finally, attach Knobs (F) to the Drawer Front Panel (12) using Bolts (G). Tighten Bolts (G) with Phillips screwdriver. Figure 5 Attach Hinges (K) to Side Panels and Door with Screws (I). Attach Magnet Plates (H) to the doors with Screws (I).
Insert drawers into the unit as shown. Make sure all slides glide smoothly in and out. Insert Adjustable Shelf Panels (10/11) in the arrows direction. Figure7 Place the Glass Top (17) onto Top Panel (1).
Attach two Brackets (M) to back Panel using Screws (M). Tighten screws (M) using a Philips screwdriver. Mark two desired locations on wall in the same distance as the Brackets (M) on the back of the unit. Drill two 3/16" holes on wall. Insert plastic anchors (M) into the 2 holes on wall as shown. (When doing this, you will need a hammer help you). Then, attach the Brackets (M) to wall using Screws (M). Tighten Screws (M) using a Philips screw driver.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.