Instructions / Assembly

Page 7
Figure 5
Attach Drawer Side Panels (13/14) to
Drawer Back Panel (15) using Screws
(E).
Tighten Screws (E) with Phillips
screwdriver.
Insert Drawer Bottom Panel (16) into the
grooves of panels (13/14/15).
Attach Drawer Front Panel (12) to the
assembled unit using Screws (E).
Finally, attach Knobs (F) to the Drawer
Front Panel (12) using Bolts (G).
Tighten Bolts (G) with Phillips
screwdriver.
Figure 6
Attach Hinges (K) to Side Panels and
Door with Screws (I).
Attach Magnet Plates (H) to the doors
with Screws (I).
Attach Knobs (F) to the doors with Bolts
(G).
Tighten Bolts (G) and Screws (I) with
Phillips screwdriver.
Attach Magnets (L) on the assembled
unit using Screw (D).
Insert Shelf Pins (J) into holes on Side
Panels Middle Panel.