OC220500TX Knox Accent Table Assembly Instructions For assistance with assembly, contact. Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO:13570 Top supports up to Page | 1 lb.
OC220500TX Knox Accent Table Parts List Please review all parts and hardware before disposing of any packaging. Before beginning assembly, separate each type of hardware. Carefully study the diagrams below and check that you have all parts indicated. Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.
OC220500TX Knox Accent Table Assembly Instructions Step 1: Unit assembly should begin with parts turned upside down for Step 1. Attach Screws (A) to Top Frame (1) and twist Screws (A) clockwise to tighten them as shown. Note: Make sure you’re inserting the Screws as they are shown on Figure 1. Figure 1 Step 2: Attach Supports (4) to Top Frame (1) onto attached Screws (A) from Step 1.
Step 3: Attach Screws (A) to Supports (4), then, attach Bottom Shelf Frame (3) and Legs (5) to Screws (A). Attach End Caps (C) to Legs (5) as shown. Figure 3 Step 4: Turn the assembled parts upright. Attach Glass Pads (D) to brackets of Top Frame (1), Middle Shelf Frame (2) and Bottom Shelf Frame (3). Place Glass Top (6) to Top Frame (1), Insert Glass Shelf (7) to Middle Shelf Frame (2) and place Mirror (8) to Bottom Shelf Frame (3) as shown. Now, your Knox accent table is ready to use.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.