Instructions / Assembly

Page 4
Figure 3
Start with finger to help align machine screws.
Use screws (D) and wood dowels (J) to vertical
Connect assembled unit on figure 1 to
assembled unit on figure 2 with Screws (4)and
Small Wood Dowels (J)
Tighten Screws (D) with Phillips screwdriver.
Figure 4
Start tightening Cam Bolts with fingers to help
align.
Insert Cam Locks (C) into holes on Fixed Shelf
(11).
Screw Cam Bolts (B) into holes on Left Side
Panel (9) and Right Side Panel (10).
Attach Left Side Panel (9) and Right Side Panel
(10) to Fixed Shelf (11) by inserting Cam Bolts
(B) into corresponding holes until Left Side
Panel (9), Right Side Panel (10) and Fixed
Shelf (11) meet.
Tighten by rotating Cam Locks (C) clockwise
with Phillip screwdriver.
"Tennyson" Fireplace
Assembly Instructions
J