User Manual

D26 Printed in USA FA Rev. 02-10
P.O. Box 2021, San Antonio, TX 78297
Ph: 210.533.1231
Fx: 210.533.2211
Web: www.SouthernFolger.com
Email: info@southernfolger.com
Electrical interlocking – Wiring and
adaptations may be made to permit
interlocking two or more doors in a
sallyport or vestibule application.
Prevents electric operation of any
other interlocked door.
Custom graphic consoles – In many
cases, corridor operators are merely
one part of a complete security
system. For these larger installations,
or those with particular needs,
custom-built consoles may easily be
provided with floor plan graphics
screened on the control panel, and an
array of specialized features.
Dimensional Data_______
NOTE: If the optional mechanical
release column is used, the 3"
minimum at the front of the door is
increased to the 7" width of the
mechanical release column and the
“No. 12 lock access to mechanical
operation” is omitted from the
removable housing cover.
Note: Dimensions are for information
and planning purposes only, and should
not be used as templates.
The illustration shown is intended for general
information and planning purposes only. Folger
Adam locking devices are fabricated to the
design of the facility.
FOLGER ADAM LOCKING DEVICES
Drive: Roller Chain
Release: Remote Electric,
Local Mechanical
Security
Level: Maximum
D2B.3 CORRIDOR
DOOR OPERATOR
Specifications_________
Drive system –
Type: Roller chain.
Motor: 120 VAC, 60 HZ, 1/10 HP.
Roller chain: #41 size.
Hangers and guides: 1/4" thick
steel.
Rollers: Anti-friction ball bearings
with hardened members and
grease shield.
Roller studs: High alloy treated steel
with self-locking nut.
Finish: USP.
Mechanism housing/covers –
Housing: 7-gauge steel.
Housing covers: 10-gauge steel.
Vertical lock column housing:
7-gauge steel.
Vertical lock column cover:
10-gauge steel.
Front receiver: 10-gauge steel.
Mechanical release column
(optional): 7-gauge steel.
Finish: USP.
Typical D2B.3 slope-top elevation.
Left hand (LH) as shown.
Right hand (RH) opposite as shown.