User's Manual

Insert a pin into the reset button on the back of the camera, press down and hold
for 5 seconds. Wait for the camera to reset and the blue light to blink.
Click the Guardpro icon to back to previous. Then click “Yes”.
Enter the Wi-Fi name and password, then
click “Next”.
If WiFi without password，you can click
“Next”.
About 15 seconds later, the blue light of
the IP Camera will be off, after another 5
seconds, the blue light will be always on.
Then the IP Camera is already on line.
You will see User and camera informations.
The default Username is “admin”; The
default Password is “admin”; The default
Camera Name is “Camera”.
Click the “Camera” icon, you can rename
the Camera Name.